Installing door run and anti window rattlers

no24 · Post by **no24** » Thu Aug 24, 2006 9:48 pm

Does anyone have good destructions, I mean instructions or tips, do's and dont do on Installing door run and anti window rattlers?

Thanks

71 LONG BED · Post by **71 LONG BED** » Fri Aug 25, 2006 9:01 am

Keith has a how-to somewhere on the home page. I'm going to look for it now...

spartman · Post by **spartman** » Fri Aug 25, 2006 9:03 am

Can a person put the newer rubber stips in the place of the window fuzzies on a 67?

71 LONG BED · Post by **71 LONG BED** » Fri Aug 25, 2006 9:05 am

71 LONG BED wrote:Keith has a how-to somewhere on the home page. I'm going to look for it now...

I can't find it, sorry.

Tim P. · Post by **Tim P.** » Mon Sep 11, 2006 2:50 pm

dennis carpenter repoductions has a tech article on there site at the end of there catalog on this subject.

flyboy2610 · Post by **flyboy2610** » Mon Sep 11, 2006 6:08 pm

Tim P. wrote:dennis carpenter repoductions has a tech article on there site at the end of there catalog on this subject.

I was just going to suggest that. It's a very good article. plenty of pics.
Here's a link to the online PDF catalog. The article starts about page 121.
http://www.dennis-carpenter.com/pdf/67-72_truck.pdf

Tim P. · Post by **Tim P.** » Mon Sep 11, 2006 11:31 pm

thanks fly i was too lazy to do that

jor · Post by **jor** » Tue Sep 12, 2006 9:08 am

I've got some good photos of the process but it likes like we still can't post images. It's pretty straighforward. The only difficult part is replacing the vent window gasket if you are going that far. It has some rivets that take a bit of doing to get in there. Good luck.
jor

no24 · Post by **no24** » Tue Sep 12, 2006 9:19 pm

Thanks to all. I really do not desire to remove the vent windows and I though I could do this without removing the entire window.
Well, I quess that will lead to just replacing more stuff that I break....
Thanks

Big D's 69 · Post by **Big D's 69** » Mon Sep 25, 2006 9:48 am

Hope it all works out. I like the disassembly a lot better than reassembly.

michaelbrainard · Post by **michaelbrainard** » Fri Sep 29, 2006 11:34 am

spartman wrote:Can a person put the newer rubber stips in the place of the window fuzzies on a 67?

I believe you can..I plan on it.

fordman · Post by **fordman** » Fri Sep 29, 2006 11:37 am

boy if that could be done i would rather hav the rubber than the fuzzies. i wonder what would fit there in place of the fuzzies though? what model year would a person get them from?

michaelbrainard · Post by **michaelbrainard** » Fri Sep 29, 2006 11:47 am

I believe ( look in the LMC catalog ) 69 was the last year the fuzzy wipers were used. Now, lets make sure we are talking about the same parts.....I am thinking of the wipers that are mounted at the bottom of the window opening. In the LMC catalog, 70 and up offer the rubber wipers. Othat than that, all parts are the same and interchange. Like I said, I believe this to be true.

fordman · Post by **fordman** » Fri Sep 29, 2006 11:51 am

yea thats what i was talking about. i didn'tknow they had those for the 70's and up. i don't pay attention to 70 and up to much. i have had 67 68 69 trucks until yesterday when i got a 70.

michaelbrainard · Post by **michaelbrainard** » Fri Sep 29, 2006 11:56 am

LMC has both the fuzzy and the rubber parts listed in the book. It is a great reference....

The FORDification.com Forums

Installing door run and anti window rattlers

Installing door run and anti window rattlers

re: Installing door run and anti window rattlers

Re: re: Installing door run and anti window rattlers

re: Installing door run and anti window rattlers

Re: re: Installing door run and anti window rattlers