battery hold down ???
Moderators: FORDification, Thunderfoot
-
ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
battery hold down ???
did our battery holddowns (the piece across the top of the battery) come from the factory rubber dipped?
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: battery hold down ???
Yes.
Dennis Carpenter has a plastic one that works well. It is dimensionally the same as the metal one, unlike the later plastic one.
Dennis Carpenter has a plastic one that works well. It is dimensionally the same as the metal one, unlike the later plastic one.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
re: battery hold down ???
thanks for the response. i have mine out and it had corrosion starting under the rubberizing so i cut it all off and cleaned it the best i could. i hit it with some rust converter and am going to redip it and see if it holds out. it is still 95% so i want to keep using it if it will last.
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson