Cargo Light

Calvin Gunter · Post by **Calvin Gunter** » Fri May 18, 2007 2:57 pm

My Ranger did not come with a cargo light from the factory but I want to add one.I bought a complete used assembly from a swap meet.My question is does anyone have a diagram as to where the harness should be routed.I have found the measurements on this sight as to where to cut the hole in the cab but couldn't find where to route the wires.TIA,Calvin

wt4speed#2 · Post by **wt4speed#2** » Fri May 18, 2007 4:31 pm

I believe it goes alomg the same route ad the dome light around behind the drives side over the drivers door and down thur the left front a-pillar . check this link .
http://www.fordification.com/images/sch ... ylight.jpg
Here is the '69 cargo light shematic as well
http://www.fordification.com/images/sch ... ycargo.jpg

Calvin Gunter · Post by **Calvin Gunter** » Mon May 21, 2007 6:09 am

Thanks 4speed,that's exactly what I was looking for.Calvin

mrsnicks · Post by **mrsnicks** » Mon May 21, 2007 6:35 am

If you do a search in the forums, someone did a write up on the placement, and I believe there are even measurements for when you go to cut out your hole to mount the cargo light.

Patrick

Calvin Gunter · Post by **Calvin Gunter** » Mon May 21, 2007 3:04 pm

Also I see some years look as though the light is mounted up side down.Although I'm going to mount mine to match the shape of the cab what is the criteria for the way they are mounted?Are certain years mounted a certain way?TIA

flyboy2610 · Post by **flyboy2610** » Mon May 21, 2007 4:56 pm

The long flat side goes on top.

The FORDification.com Forums

Cargo Light

Cargo Light

re: Cargo Light

re: Cargo Light

re: Cargo Light