Front 4X4 u joints

hotrodfeguy · Post by **hotrodfeguy** » Mon Jul 16, 2007 5:29 pm

Is it right to have a cross-joint in the front? Is that factory? I measured and it has like 3 5/8" one way ans 3 1/4 the other. Thanks for the help

averagef250 · Post by **averagef250** » Mon Jul 16, 2007 7:26 pm

Been awhile since I've had a stocker highboy bump, but I think anything with the 24 case ran 1310 joints front and rear. The 205 trucks ran 1310's front and 1330's rear.

heep70 · Post by **heep70** » Mon Jul 16, 2007 8:15 pm

Mine if I remember right have what they call conversion u-joints on all ends. 1310/1330 or 1/2 ton to 3/4 ton so to speak. The u-joint itself is wider one way then the other. I don't have the PN#.

hotrodfeguy · Post by **hotrodfeguy** » Tue Jul 17, 2007 8:50 pm

I used 10134BF it was a brute force joint and they say they are suposed to take a beating we will see.

The FORDification.com Forums

Front 4X4 u joints

Front 4X4 u joints

re: Front 4X4 u joints