The hood may fit, but is very wrong.
The '79 has a mated tranny and t-case. You can run it if you run the 79 front axle.
1979 to 1972 f-250 parts swap,scavenging
Moderator: Doug Comer
-
averagef250
- 100% FORDified!
- Posts: 4387
- Joined: Fri Mar 17, 2006 12:58 am
- Location: Oregon, Beavercreek
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: 1979 to 1972 f-250 parts swap,scavenging
The hood won't work unless you also use the dentside radiator support and hood latch. On our bumpsides, the latch is on the hood and the catch is on the radiator support, but on the dentsides the latch is on the radiator support and the catch is in the hood.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
ima71 trucks are older
- New Member
- Posts: 142
- Joined: Tue Jul 10, 2007 10:39 pm
- Location: Washington (the dry part of the state)