Steering wheel connector conversion

Charging, starting, lighting, gauges, HVAC

Moderators: FORDification, Thunderfoot

User avatar
Thunderfoot
100% FORDified!
100% FORDified!
Posts: 2207
Joined: Tue Apr 17, 2007 2:34 pm
Location: Idaho, Boise

re: Steering wheel connector conversion

Post by Thunderfoot »

Thanks FormerMarine, that helped some... Still can't read the boxes...
Anyway...

Not sure but I think that single connector under the dash is for instrument lighting (I think for if you had A/C)... so I don't think it's used...

In the second pick that 2pin connector looks like it might be for the voltage regulator... I was thinking your horn but you said that worked...

Not sure on the fused link one... What color is the wire?
Shayne
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...

69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

the one wire i thought was a modular plug hooks to the large bolt on the rear of the altnator. i am guessing that the black fuseable link wire might go to the battery side of the solinoid. but i cant tell on my truck it is all hooked up and all the tape is on my wires.
Post Reply