Heater core bumper glue?

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

User avatar
HOWDY69
Preferred User
Preferred User
Posts: 484
Joined: Sat Dec 31, 2005 6:31 pm
Location: California, Sacramento

Re: re: Heater core bumper glue?

Post by HOWDY69 »

FormerMarine1981 wrote:1971Ford do you have the factory AC/Heater combo?
He has an extensive thread on his heater project.

http://www.fordification.com/forum/view ... 92&start=0
69 F250, FE Specialties 410, CJ Valves, RPM Intake, Holley 4150,......10 Smiles per gallon
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
User avatar
1971ford
100% FORDified!
100% FORDified!
Posts: 5565
Joined: Wed Jul 04, 2007 1:05 pm
Location: Placerville CA

Post by 1971ford »

yes i have a heater/ac combo that is waiting to be installed. you can see the link that howdy provided.
thanks howdy69!
-Ryan
User avatar
HOWDY69
Preferred User
Preferred User
Posts: 484
Joined: Sat Dec 31, 2005 6:31 pm
Location: California, Sacramento

Re: re: Heater core bumper glue?

Post by HOWDY69 »

Tim P. wrote:I do belive you can get a new rubber set from bronco graveyard its listed under the broncos which is the same as ours trucks for the htrs stuff.
I used silicone adhesive on the bumper and put the box back together but the core could still rattle around. I don't want to listen to it rattle and since I have to fight the box past the dealer A/C to get it back in I decided to order the seal kit and try and do it right the first time. Thanks for the heads up on the seal kit.
69 F250, FE Specialties 410, CJ Valves, RPM Intake, Holley 4150,......10 Smiles per gallon
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
Post Reply