painless wiring harness install
Moderator: FORDification
-
tybob81
- Blue Oval Fanatic
- Posts: 840
- Joined: Thu Mar 23, 2006 2:53 am
- Location: Murphysboro IL
- Contact:
painless wiring harness install
I started to mount and route my new painless wiring harness for a 67-77 ford truck.
You do not have the required permissions to view the files attached to this post.
1968 swb hydroboost, ididit tilt column, Saginaw p/s pump with F series serpentine, all led lights, Vintage Air and painless wiring. 393w, tko600. CV front suspension w/c5 calipers and gt500 rotors. Stock Flexomatic leaf springs with 01 CV 8.8, 3.90 gears and Auburn locker. Custom wood bed floor. Full frame off resto-mod.
-
Finleyphoto
- New Member
- Posts: 99
- Joined: Mon Jun 19, 2006 11:48 pm
- Location: Fort Worth, Texas
re: painless wiring harness install
Are you using a resistor to the coil from the ignition switch?
Trying to help another member out with his wiring.
I like that distributor you got there. Which one is it?
Thanks - Dennis
Trying to help another member out with his wiring.
I like that distributor you got there. Which one is it?
Thanks - Dennis
Check out my Photos on Webshots at...
The Whiskey Flats Farm & Implement Co.
http://good-times.webshots.com/album/560836732OwHRTB
The Whiskey Flats Farm & Implement Co.
http://good-times.webshots.com/album/560836732OwHRTB