vent window seal
Moderator: FORDification
-
- New Member
- Posts: 36
- Joined: Wed Jan 24, 2007 7:31 pm
- Location: Mississippi
vent window seal
Hope all had a good Christmas, went to Kansas City, in-laws, do not see how people live in the north, brrrrrrr, cold, I like my 60s winter, any way DC is out of vent seals, said about a month, any other venders that yall would use? Jay
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: vent window seal
Jay,
Know what you mean about the winters.
Here you go:
http://cgi.ebay.com/ebaymotors/NEW-67-6 ... enameZWDVW
I see them on there quite a bit.
Jeff
Know what you mean about the winters.
Here you go:
http://cgi.ebay.com/ebaymotors/NEW-67-6 ... enameZWDVW
I see them on there quite a bit.
Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
LMC sells them, too.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
- Preferred User
- Posts: 467
- Joined: Mon Nov 26, 2007 1:16 am
- Location: Washington, Poulsbo
re: vent window seal
I have read posts on the forum about the LMC ones not being the best choice. I would go for the NPD always had good luck there.
Spell check does not always work it can't tell if you want good or god had to edit.
Spell check does not always work it can't tell if you want good or god had to edit.
Hi, I'm Nathan and I approved this message.
1968 F250 LWB 360 (now 390) 4 sp High boy mine
1999 Expedition Eddie Bauer Edition 5.4 liter girlfriend and daughters
1968 F250 LWB 360 (now 390) 4 sp High boy mine
1999 Expedition Eddie Bauer Edition 5.4 liter girlfriend and daughters
-
- New Member
- Posts: 36
- Joined: Wed Jan 24, 2007 7:31 pm
- Location: Mississippi
re: vent window seal
Thanks, Jay
- Blue Cloud
- Preferred User
- Posts: 404
- Joined: Sun Jun 25, 2006 10:12 pm
- Location: Wyoming
re: vent window seal
I wouldn't recommend LMC either. I put a set of vent window seals on my truck in early summer of this year and they are starting to weather check already.
- jzjames
- 100% FORDified!
- Posts: 1785
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
re: vent window seal
Ive got an original LH 68-72 vent window assy. in pretty good cond. already boxed if you can use it and would like to go the easy route.