when i hit the brakes both turnsignal indicators light up
Moderators: FORDification, Thunderfoot
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
when i hit the brakes both turnsignal indicators light up
i assume this is the dummy light for the brake warning switch? if not how would i fix it? it has new brakes lines and a master cylinder.
also if ya can help when i put mu left turn signal on it puts my 4 ways on but my E flasher switch doesnt work
also if ya can help when i put mu left turn signal on it puts my 4 ways on but my E flasher switch doesnt work
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
- wt4speed#2
- Blue Oval Guru
- Posts: 1064
- Joined: Fri Mar 25, 2005 9:21 pm
- Location: Texas, Ft. Worth
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
the brake warning switch isnt in this problem. i think your porblem is the flasher cans. change both of them. unless someone has rewired the wiring in your truck. little more history on the truck mihgt help too. is this a new truck to you or have you had it for a long time? and has this problem just developed?
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
new truck to me havent really gone over the wires yet, ill have to look at the schematics
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
- ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
i'd start under the bed in the rear of the truck. sounds like someone has cross wired the turn signals into the brakes. or it could be a bad ground. the turn signal cam in the column could also be toast.
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
That was my first thought.ezernut9mm wrote:the turn signal cam in the column could also be toast.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
- Preferred User
- Posts: 284
- Joined: Wed Jul 25, 2007 9:20 am
- Location: Arizona, Globe
re: when i hit the brakes both turnsignal indicators light u
Sounds to me that your 4 way switch is on and the 4 way flasher is burned out. The fact that your indicater lights show while braking means that your front turn lights are coming on along with the rears indicating that your 4 way switch is turned on. Could also be no juice to the 4 way circuit(bad flasher or fuse).
Fred
Fred
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
yeah when i turn the 4 ways on nothing happens no flasher sound, when i turn my left turn signal on all 4 light up like if i had my flashers on. but when the right turn signal is on its only the right
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
yeah ill have to break out the arctic gear cause it's cold out there today. and i have no garage
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
- rjewkes
- 100% FORDified!
- Posts: 3711
- Joined: Sun Apr 17, 2005 1:09 am
- Location: Missouri, Webb City
- Contact:
I also wonder about the condition of your wiring underneath the cab/truck and just aunder thdash or even up under the hood on the driverside inner fender.
BtW love the Avatar is that the boondock saints?
BtW love the Avatar is that the boondock saints?
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
yeah it is. i know i have to look at everything really good cause this truck is old and it is all original cept the bed its from a 73-79
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
not sure really i gotta clean the bark and snow out of it cause i was wondering the same thing since the 67-72's are narrower. but i have a line on a really good 72 bed and parts truck to replace this one
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
- ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City