what is under padded dash?
Moderator: FORDification
- Kurt Combs
- Blue Oval Guru
- Posts: 1341
- Joined: Sat Apr 22, 2006 11:12 pm
- Location: California, Lakeport
what is under padded dash?
I was thinking that I might just remove my 72 bump's padded dash and go with all metal. Does that dash look ok under all that padding and vinyl?
Kurt
1972 F-250
1972 F-250
-
- Blue Oval Guru
- Posts: 1341
- Joined: Sun Aug 06, 2006 5:41 pm
- Location: Utah, Springville
- Contact:
- kaptnkaos
- 100% FORDified!
- Posts: 2029
- Joined: Thu Feb 16, 2006 1:27 am
- Location: Washington, Elma
re: what is under padded dash?
Washington...The land where rust is like the family pet...Ya learn to live with it and clean up after its mess... KaptnKAOS
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
- l1k2gadd
- Preferred User
- Posts: 266
- Joined: Sun Sep 09, 2007 5:49 pm
- Location: Florida, Summerfield / Belleview
My Bump was "Dashpad-less" when I got it. I believe the sun faded the heater control illumination plastic from all of the exposure to the southern sun because it looks whit-ish with the headlights or parking lights on. My instrument panel lights are whit-ish colored too (unless they are supposed to be), not green-ish like all of my other vehicles. I found one of those carpet dash-mats in a '72 that had a Semi-Holes embroidered patch in the center section of it that I removed from it. I think the dash looks better covered. I am inactively looking for a good dash pad for mine and when I find one I will remove the dash-mat.
Too many projects, too little time, but.. lovin' it!
2-1966 Mustangs (one 289-2V and one 200 6 Cylinder),
1-1990 7-Up 5.0 Mustang LX Convertible (second one),
1-1990 7-Up 5.0 Mustang LX Convertible (third one, for parts only)
1-1990 7-Up 5.0 Mustang LX Convertible (fourth one, best of the bunch).
1-1992 "FEATURE" 5.0 Mustang LX Convertible (only one)
1-1993 "FEATURE" 5.0 Mustang LX Convertible (one of the yellow ones)
2-1966 Mustangs (one 289-2V and one 200 6 Cylinder),
1-1990 7-Up 5.0 Mustang LX Convertible (second one),
1-1990 7-Up 5.0 Mustang LX Convertible (third one, for parts only)
1-1990 7-Up 5.0 Mustang LX Convertible (fourth one, best of the bunch).
1-1992 "FEATURE" 5.0 Mustang LX Convertible (only one)
1-1993 "FEATURE" 5.0 Mustang LX Convertible (one of the yellow ones)
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- SteveC
- Blue Oval Guru
- Posts: 1091
- Joined: Mon Oct 29, 2007 11:04 pm
- Location: Nebraska, North Platte
- Contact:
re: what is under padded dash?
that sounds a little to far from the truth
![Wink :wink:](./images/smilies/icon_wink.gif)
![Surprised :o](./images/smilies/icon_surprised.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
I don't really care about brands Chevy Ford Dodge ...as long as it doesn't sound like two old dudes farting in a coffee can.
http://s169.photobucket.com/albums/u223/imabaka70/ Projects listed on the left side
WOOOT!! i passed my mechanics classes. Now working as a mechanic and waiting to go for my ASE certifications.
1967 f-100 4x4
1969/72 f100 351w EFI m5r2 5 speed
1988 ford f150 xlt lariat
1961 VW Beetle (wifes car)
http://s169.photobucket.com/albums/u223/imabaka70/ Projects listed on the left side
WOOOT!! i passed my mechanics classes. Now working as a mechanic and waiting to go for my ASE certifications.
1967 f-100 4x4
1969/72 f100 351w EFI m5r2 5 speed
1988 ford f150 xlt lariat
1961 VW Beetle (wifes car)
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- Kurt Combs
- Blue Oval Guru
- Posts: 1341
- Joined: Sat Apr 22, 2006 11:12 pm
- Location: California, Lakeport
re: what is under padded dash?
Fordman, I will run out and look under my dashpad asap....just in case. ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Kurt
1972 F-250
1972 F-250
- 1971ford
- 100% FORDified!
- Posts: 5565
- Joined: Wed Jul 04, 2007 1:05 pm
- Location: Placerville CA
and if you decide to go without a dash pad, make sure you tear the defroster vents out of the dash pad and use them on the metal dash. they have screw holes and everything to put them on the metal (did ford make the screw holes purposly for people not wanting the pad
)
here is what my 71's looks like:
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0053-2.jpg)
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0039-3.jpg)
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0008-2.jpg)
i think it looks awesome without the pad. id weld up the wholes but i dont have paint.
![Confused :?](./images/smilies/icon_confused.gif)
here is what my 71's looks like:
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0053-2.jpg)
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0039-3.jpg)
![Image](http://i283.photobucket.com/albums/kk294/bumpsidekid/IMG_0008-2.jpg)
i think it looks awesome without the pad. id weld up the wholes but i dont have paint.
-Ryan
-
- New Member
- Posts: 75
- Joined: Tue Oct 09, 2007 8:13 pm
- Location: Florida
re: what is under padded dash?
I found a ballpoint pen my mom stole from the government when she used to work for Social Security years ago under my original dash pad. It still worked.
I stared at the dash for about 10 minutes without the pad, but I decided to put a pad on it.
I stared at the dash for about 10 minutes without the pad, but I decided to put a pad on it.
1972 F250 Crew Cab
Family heirloom
Photo gallery: http://www.fordification.com/galleries/ ... ?cat=10482
Family heirloom
Photo gallery: http://www.fordification.com/galleries/ ... ?cat=10482
- Underdog97
- New Member
- Posts: 75
- Joined: Fri Feb 08, 2008 12:03 am
re: what is under padded dash?
Some of us get all the breaks, I wish I'd of found $100.00 bills lining the underneath of my dash pad, all I've found so far has been petrified ants and a couple of bee carcasses. Fordman must've got DB Cooper's old Ford truck, And we wondered where he hid all of that money from the Hijacking, it was under Fordman's part's truck dash all these years (LOL) Can I come over and check behind the gas tank?Please!
- MadMaxetc
- Blue Oval Fanatic
- Posts: 850
- Joined: Wed Jan 03, 2007 10:48 pm
- Location: Kansas, Wichita
- Contact:
I have mine off and like it, but I would put a nice one on if I found one.
You also might want to check to make sure it is legal to take it off in your area. Some placees require it, as it was there for safety. (head impact)
You also might want to check to make sure it is legal to take it off in your area. Some placees require it, as it was there for safety. (head impact)
Dan
Project: '63 F-100 LWB / 460 / C6 / 2x4 / Work In Progress!
Daily Driver: '67 F-250 Converted to F-100 LWB / 300 / T-5 / 9" 3.70:1 / 235/75R15 Tires
1/4 mile in 17.64s @ 75mph (it's 4200lbs!!!)
"Work Harder! Millions On Welfare Depend On YOU!!"
FORD Girl
Photobucket Pictures
Project: '63 F-100 LWB / 460 / C6 / 2x4 / Work In Progress!
Daily Driver: '67 F-250 Converted to F-100 LWB / 300 / T-5 / 9" 3.70:1 / 235/75R15 Tires
1/4 mile in 17.64s @ 75mph (it's 4200lbs!!!)
"Work Harder! Millions On Welfare Depend On YOU!!"
FORD Girl
Photobucket Pictures
- ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
so how do you remove it? cause mine has the big crack in the middle and the PO tried to fill it in with something that now looks like sheetrock/drywall
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
- 1971ford
- 100% FORDified!
- Posts: 5565
- Joined: Wed Jul 04, 2007 1:05 pm
- Location: Placerville CA
I hope you have small hands ![Laughing lol](./images/smilies/icon_laughing01.gif)
there are just nuts holding it in. but, theres a bunch. scattered on the underside of the dash, there are many nuts that you just have to get to with a wrench. there is one hard to find hidden nut on each inner corner of the pad on the drivers and pass. side. dont forget those.
i think there are 14 nuts.
![Laughing lol](./images/smilies/icon_laughing01.gif)
there are just nuts holding it in. but, theres a bunch. scattered on the underside of the dash, there are many nuts that you just have to get to with a wrench. there is one hard to find hidden nut on each inner corner of the pad on the drivers and pass. side. dont forget those.
i think there are 14 nuts.
-Ryan