Park brake pedal assembly

[wt4speed#2]

Any one have one out the can post a picture of. I need to see the spacer blocks and bolts. When pulling mine one of the bolts snaped . I'm trying to fab in some bolts , these spacers have little slots and indentions on them . I can't remeber the position they were in when I drilled out the original bolts. wondering what the significance of the slots and ribs are??

[fireguywtc]

I don't know if it matters but is it for a auto or manual? I am going to be pulling my assembly out of my project 67 very soon, which has a clutch in the assembly. If nobody beats me to it I will put up some pics of mine. I know the feeling of forgeting how or why something went a certain way, it sucks!

[wt4speed#2]

Oops sorry it was originally a manual truck. And judging from the condition of the bolts it's never been out. Was thur Saldo the other day going to Austin .

[fireguywtc]

Here is a pic. I have it assembled and I hope thats what you need. If ya ever want to stop by salado some time feel welcome and I always have some beer.

[FORDification]

I think Tony was asking for pics of the parking brake mechanism.

Do these help? I did some poking around in my picture collection of my teardowns, and these are the best I can find at the moment.

[wt4speed#2]

I think Tony was asking for pics of the parking brake mechanism.

Do these help? I did some poking around in my picture collection of my teardowns, and these are the best I can find at the moment.

Thanks Keith & fireguy
Keith the top pic showed me what I was looing for . In my application I think the slots and grooves don't mean much . I dont remember anything being attached there. It's just a spacer,I hope. I was just kinda of curious what the big slot and the soild grooves where used for.

Thanks again guys.

[FORDification]

Yes, those are just spacers to clear the firewall cover. You could easily use a stack of washers if you wanted.