radio
Moderator: FORDification
-
hotrod ford
- Blue Oval Guru
- Posts: 1121
- Joined: Wed Apr 25, 2007 12:09 am
radio
are the knob fingers on the dash of a 67 more narrow than the 68 and up. i know the the hole itself is smaller.
1971 Sport Custom SWB: 360/C6 3.00
1965 Ford Falcon 4Dr: Inline 170 3sp
1965 Ford Falcon 4Dr: Inline 170 3sp
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
Re: radio
Yes. The center-to-center distance between the holes on the mounting tabs on a '67 are 4-11/16", while the '68-'72 measurement is 5-3/4".
The mounting hole itself for the radio measures 7-3/8" x 2-5/8" for '67, and 7-5/8" x 3-1/2" for '68-'72.
The mounting hole itself for the radio measures 7-3/8" x 2-5/8" for '67, and 7-5/8" x 3-1/2" for '68-'72.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
hotrod ford
- Blue Oval Guru
- Posts: 1121
- Joined: Wed Apr 25, 2007 12:09 am
Re: radio
boo. thanks for the info. are any am/fm radios that will fit in a 67 from any other ford vehicles? or do i have to buy after market?1971 Sport Custom SWB: 360/C6 3.00
1965 Ford Falcon 4Dr: Inline 170 3sp
1965 Ford Falcon 4Dr: Inline 170 3sp