70-72 cluster in 69 f100
Moderators: FORDification, Thunderfoot
-
- New Member
- Posts: 40
- Joined: Tue May 05, 2009 5:37 pm
- Location: Kemp, Tx
70-72 cluster in 69 f100
i found a 70-72 f100...it has a good instrument cluster in it and was wondering if it will work in my 69 f100 without having to mod anything at all??
-
- Blue Oval Fanatic
- Posts: 929
- Joined: Thu Dec 18, 2008 1:33 pm
- Location: Mountain Home,Idaho
- Contact:
Re: 70-72 cluster in 69 f100
I think there is a section on here that shows the differences in the panels mainly being wiring. I would try looking at that.
Troy
Why is it that the trucks are always the best running vehicles in the family?
Ford means "found on road daily"
70 F100 Custom-352 w/68 Highboy 4x4 frame. My play/project truck
70 F250 Explorer-390/C6 auto. My work truck
04 Mitsubishi montero-family car
Why is it that the trucks are always the best running vehicles in the family?
Ford means "found on road daily"
70 F100 Custom-352 w/68 Highboy 4x4 frame. My play/project truck
70 F250 Explorer-390/C6 auto. My work truck
04 Mitsubishi montero-family car
- Lar4t9r
- New Member
- Posts: 117
- Joined: Fri Sep 28, 2007 9:35 am
- Location: Ocala, Florida
Re: 70-72 cluster in 69 f100
1969 did not have the printed circuit board but 70-72 did. 1970 "Only" is different than other printed circuit boards. The plugs will not work stock from the '69 ino the later years, and '70 won't work stock on later years. You would need to do some re-wiring.cjroddam wrote:i found a 70-72 f100...it has a good instrument cluster in it and was wondering if it will work in my 69 f100 without having to mod anything at all??
Here is the location of info on this site to check out the cluster diferences:
http://www.fordification.com/67-72ID.htm
Laurence (Proud owner of 1969 Ford F-100 and 1970 GTO)