'71 F250 with a factory filler panel. Can not figure out how to get this off. I have been feeling behind it thru the glove box opening and found something on each side that I can not loosen.
Any suggestions?
Thank you,
Jeff
Radio delete panel removal
Moderator: FORDification
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Radio delete panel removal
they are nuts. i forget the size of socket they take to get them off. but that is how to do it. with a socket.
-
njs
- New Member
- Posts: 12
- Joined: Sat Apr 18, 2009 7:51 am
Re: Radio delete panel removal
fordman,
Thank you.
After waiting for help and before your input, I looked again by taking out the ashtray and then offing the 2 heater hoses and found the nuts with a mirror. What happened earlier was the nut on the glove box side was spinning on the plastic post and it threw me for a loss.
Have a great w/e.
Jeff
Thank you.
After waiting for help and before your input, I looked again by taking out the ashtray and then offing the 2 heater hoses and found the nuts with a mirror. What happened earlier was the nut on the glove box side was spinning on the plastic post and it threw me for a loss.
Have a great w/e.
Jeff