grant removal?

[hotrod ford]

alright, i have a new blinker switch and have the old one de-pinned. i have no instructions for a grant and need to remove mine to replace the wireing. how does it come off?

here is the type of wheel:
http://i180.photobucket.com/albums/x115 ... 1251060819

[fordman]

i would look under the center cap. i have no idea how to do it. butt he bolts nuts or screws are probably under the cap.

[Darrman]

First disconnect the horn wire at the horn, or disconnect the battery altogether. Then push down and twist the horn button in the middle of the wheel, it should twist off, be careful to catch the spring behind it, it will probably come flying out. Underneath will be three bolts, take these out, disconnect the one small wire that you will see. Then use a 15/16th socket to remove the main nut int the center, the steering wheel will come off at this point. The hub assembly underneath may or may not have to be pulled with a steering wheel puller, depends. After the hub is removed, you will have access to all the wiring.
Hope this helps!