license plat light
Moderators: FORDification, Thunderfoot
-
hotrod ford
- Blue Oval Guru
- Posts: 1121
- Joined: Wed Apr 25, 2007 12:09 am
license plat light
where does this plug into on the wire harness? i'm using a after market one because i have no rear bumper.
1971 Sport Custom SWB: 360/C6 3.00
1965 Ford Falcon 4Dr: Inline 170 3sp
1965 Ford Falcon 4Dr: Inline 170 3sp
-
fireguywtc
- 100% FORDified!
- Posts: 3682
- Joined: Thu Sep 11, 2008 7:37 pm
- Location: North Alabama
Re: license plat light
You can just splice it into the running lights wire. On my 67 I used to think it didn't come with a license plate light until one day I looked behind the bumper and there is a hidden bracket with the light on the drivers side for use with no bumper (I guess.) If you have one of those you can splice into that wire also.
Bill
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
1970 F-250 4x4 highboy ranger 390 V8, 4spd
2012 F-350 PSD FX4 LWB CC lariat, white
http://www.fordification.com/galleries/ ... hp?uid=602
"If you want to judge a person's true character, give them power."
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
1970 F-250 4x4 highboy ranger 390 V8, 4spd
2012 F-350 PSD FX4 LWB CC lariat, white
http://www.fordification.com/galleries/ ... hp?uid=602
"If you want to judge a person's true character, give them power."
-
hotrod ford
- Blue Oval Guru
- Posts: 1121
- Joined: Wed Apr 25, 2007 12:09 am
Re: license plat light
alright i will try it, thanks . i took off the bumper that was on there because it was rotten on the ends. i'm going to get a sport bumper for it.
1971 Sport Custom SWB: 360/C6 3.00
1965 Ford Falcon 4Dr: Inline 170 3sp
1965 Ford Falcon 4Dr: Inline 170 3sp
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: license plat light
no there is a plug for it. right in the center of the tail light harness.