does anyone know if the door seal plates came stock on all bumps?
my dad seems to think they did and i have no clue
quik question
Moderator: FORDification
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
- 1971ford
- 100% FORDified!
- Posts: 5565
- Joined: Wed Jul 04, 2007 1:05 pm
- Location: Placerville CA
Re: quik question
the aluminum plates that run along the weatherstripping, that also hold the carpet down? Yes those are on all bumps.
-Ryan
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: quik question
yes they came on all trucks. to hold down the carpet or mat. plus they aslo hold the door rubber ends on. that is where they meet is under the sill plate.
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: quik question
yup those are the plates im talking about mine are missing and a big chunck of weatherstripping is gone to i guess i will look for some new ones and some new weatherstripping too
thank you
thank you
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
Re: quik question
LMC has them. That's where I got mine, and they fit just fine.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: quik question
okay would dent side sill plates fit? i have a set out my 73
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: quik question
yes they will fit. the only real difference is where they come up the kick panel. the dentside ones dont go up as far as are do. so the screw hole in hte kick panel will still be showing if you use the dentside plates.
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: quik question
thank you i will have to pull them plates
- austin
- Blue Oval Fan
- Posts: 572
- Joined: Mon May 04, 2009 11:30 pm
- Location: Utah, Moroni
Re: quik question
pulled the plates they fit perfect i going to polish them up a bit and install them for good