No brake lights
Moderators: FORDification, Thunderfoot
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
would the tail lights and turn signals still work if the tss is bad?
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- Heathcliff68f100
- New Member
- Posts: 203
- Joined: Tue Nov 24, 2009 3:50 am
- Contact:
Re: No brake lights
Yes, I had that problem, and it held me up for months, i tore the dash out and traced every wire, the switch had melted on one of the terminals, and so all i had was turnsignals and my left hand brake light, check the tss
1989 dodge b250 van, 239 v6 blown a904 tranny RIP
1968 ford f100 lwb l6 240 c6 tranny
1968 ford f100 lwb l6 240 c6 tranny
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
Thanks guys I will look at the tss tomorrow!
- Thunderfoot
- 100% FORDified!
- Posts: 2207
- Joined: Tue Apr 17, 2007 2:34 pm
- Location: Idaho, Boise
Re: No brake lights
Is this a problem that just showed up (was working before and now isn't) or is it a problem that came with the truck when you got it?
Shayne
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...
69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...
69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: No brake lights
67twinstang,
You definitely should get some kind of insulation around this wiring connection when done. Not too cool for underdash wiring to be left exposed like this:
You definitely should get some kind of insulation around this wiring connection when done. Not too cool for underdash wiring to be left exposed like this:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
Thunderfoot wrote:Is this a problem that just showed up (was working before and now isn't) or is it a problem that came with the truck when you got it?
This is a problem that came with the truck.
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
At first the brake lights and interior dome light would always stay on when the truck was running and I couldn't get them to shut off and now this.
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
I removed the fuse yesterday right before I took the pic. I plan on replacing all the fuses today. which fuse is the brake light/hazzard fuse?
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
Oh and I forgot to mention that my emergency flashers don't work either. I hate electrical issues
- Thunderfoot
- 100% FORDified!
- Posts: 2207
- Joined: Tue Apr 17, 2007 2:34 pm
- Location: Idaho, Boise
Re: No brake lights
It's the one right next to the dome light one. http://www.fordification.com/tech/wirin ... epanel.jpg67twintstang wrote:I removed the fuse yesterday right before I took the pic. I plan on replacing all the fuses today. which fuse is the brake light/hazzard fuse?
That doesn't surprise me, they are on the same power circuit and feed all the way up to the TSS via 2 separate routs but meet at the same location going into the TSS. So one of two possible issues still, either the power for it or the TSS.67twintstang wrote:Oh and I forgot to mention that my emergency flashers don't work either. I hate electrical issues
Shayne
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...
69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
I'm not "Brand Loyal" Ford-Chevy-Dodge-Toyota I have them all, one even cross mixed...
If it Looks good and Works good then it's ok by me. Everything has its issues from time to time...
69 SWB (project) & 69 Highboy (driver/project)
http://s197.photobucket.com/albums/aa29 ... d%20truck/
http://www.fordification.com/galleries/ ... ?cat=10399
- Dragon
- 100% FORDified!
- Posts: 2659
- Joined: Sat Feb 16, 2008 4:43 pm
- Location: Albuquerque, New Mexico
- Contact:
Re: No brake lights
And that jumper might be on that fuse because corrosion has caused the contact to fail behind the fuse holder where they are riveted together.
Old Fords Rule
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test
Was a Ford Service Tech
71 F250 with Shell Car 390 NP435 Dana 60 3.73s, PS, PB, 750 EC VS Holley Accel Points Eliminator.
98 Volvo S70 2.4T Auto
71 Service manuals Volumes 1,2,3 and 4 So ask away.
My Gallery
Spark test
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
Thanks for being so helpful guys! I haven't had a chance to work on the truck today. I will try tonight or tomorrow!
-
- New Member
- Posts: 20
- Joined: Sun Jul 19, 2009 8:51 pm
- Location: bay area, ca
Re: No brake lights
I fixed the problem. Believe it or not the corroded terminals in the fuse box were the source of the problem. So I cleaned up the terminals with some sandpaper and replaced the fuses. Now my brake lights and emergency flashers are working. Thanks for all the info and help.