Looking for a wire harness

[f100fordtruck]

It's been a while since I've done anything to the ole truck but gonna start workin on it again in about 10 days. What company sells a good wiring harness for a 1969 ranger package.

[fordman]

gauges of lights in the cluster? here is one for lights in the cluster. yes this is mine. http://cgi.ebay.com/ebaymotors/ws/eBayI ... ESELX%3AIT

[f100fordtruck]

I was looking for the whole harness

[fordman]

for lights or gauges in the cluster? the ebay link is for lights.

[f100fordtruck]

I just know the Ignition wire is toast from the battery all the way to the coil, so whichever harness that would be on. I believe all the other wires are good.

[fordman]

thats part of the main cab harness. soem of the vendors i can think of for a aftermarket harness complete is ron francis painless ezwiring there are others. i have seen them on ebay. or you can check the links apge to see hwat is in there. http://www.fordification.com/links.htm

[rangerdanger]

The wire to the coil is a pink high resistance wire it has kind of a soft outer covering, it runs from the ignition switch to the fire wall in about the centre. It disconnects at the firewall with a red/white stripe and white red strip for thhe temp and oil senders. Just replace it if you have no power to the coil. The pink wire on my 67 has a braided outer soft fabric covering and is not wraped with the rest of the harness. All harneesses are the same for most f models from 67 to 72 according to the wiring diagram. Have a look at the diagram on this site. You should be able to use a harness from any model and it will fit (as long as its 67 to 72)
cheers

[f100fordtruck]

The wire to the coil is a pink high resistance wire it has kind of a soft outer covering, it runs from the ignition switch to the fire wall in about the centre. It disconnects at the firewall with a red/white stripe and white red strip for thhe temp and oil senders. Just replace it if you have no power to the coil. The pink wire on my 67 has a braided outer soft fabric covering and is not wraped with the rest of the harness. All harneesses are the same for most f models from 67 to 72 according to the wiring diagram. Have a look at the diagram on this site. You should be able to use a harness from any model and it will fit (as long as its 67 to 72)
cheers

thats what i
m probably gonna do

[fordman]

you can just replace the resistor wire liek he was indicating. it is availbe at the local parts stores as a resistor wire. i forget what gauge it is though.