Bucket Seat Brackets make you off set?

[SteveBrethouwer]

I don't know if anybody else has experianced this with there factory brackets but, they off set too the right of the steering coloum a couple inches, it won't be bad once I put in a center console because I always find myself leaning to the right anyway in my 2001 f-150, just trying to be cool, . I don't know but it also could be that I'm using 1967 mustang buckets and maybe the seats on an original truck seat is just wider, am I Crazy or what?

[fordman]

mustang seat brackets are different than the truck brackets. i cant remember why. hawkrod has posted this info before do a search abotu mustang seat brackets and look at this posts.

[70_F100]

It's not the brackets that are offset.

The steering column is installed at an angle.

[pritch1958]

your right about the steering column pointing to the left. It bugged me enough that I made my own brackets out of 3/8ths 2" flat strap. Their welded to the rails of seats out of a 09 mustang where they cover the factory bench seat bolt holes. I did have to drill a couple holes for the inside front holes. But it was worth it to get the seat where I wanted it.

[pritch1958]

I meant 3/16ths not 3/8 cause that would be a little fat to bend in my garage!