67 Ranger instrument panel bezel

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
bmerkley58
New Member
New Member
Posts: 64
Joined: Sun Mar 06, 2005 7:23 pm
Location: Indiana, Jasper

67 Ranger instrument panel bezel

Post by bmerkley58 »

I was wondering what a 67 Ranger instrument panel bezel looks like and if it is the same as any of the other bezels.
I have seen some listed as being correct for the 67 Ranger but they had later part numbers on them than what a 67 would have,
so I have some doubt that they would be correct.

Thanks, Bob
User avatar
Joshpow
100% FORDified!
100% FORDified!
Posts: 1790
Joined: Fri Jan 21, 2005 10:43 am
Location: Virginia
Contact:

Re: 67 Ranger instrument panel bezel

Post by Joshpow »

Never seen but one cluster bezel in 67. Thats the metal one painted white and black. Not 100% sure nothing else existed just saying thats all I have ever seen.
Josh

72 F-100 Ranger XLT SWB
71 F-100 Custom SWB
67 F-350 Dually Dump
02 F-250 Stroke
http://www.cardomain.com/ride/2972100
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: 67 Ranger instrument panel bezel

Post by fordman »

the plastic ones are for the higher trim model trucks. the metal ones are for the base trucks. so if yo uhave plastic it is a ranger. if you have metal you don't have a ranger. http://www.fordification.com/tech/67-72ID_01.htm
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: 67 Ranger instrument panel bezel

Post by mk »

The black areas on the 67/68 Custom Cab/Ranger chrome plastic bezels are ribbed vs flat on the 69-up bezels. The woodgrain decals applied starting with the 69 Ranger won't stick very well to those ribs.


mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
Post Reply