http://bellingham.craigslist.org/pts/2305002772.html
I have a 70. I thought the floor plan changed in 73. Should i get it or look deeper into it first?
will this carpet fit?
Moderator: FORDification
- nolan in blaine
- New Member
- Posts: 82
- Joined: Tue Apr 27, 2010 10:45 pm
- Location: Blaine Wa
will this carpet fit?
nolan in blaine
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: will this carpet fit?
not enough information. the floors pans and hump cover are the same in our trucks. but the 73 and up arent exactly the same floor area. i tmay not fit. it may just hang out the doors a slight bit. ask the guy what truck he was going to put it in before you tell him what truck you have.
- nolan in blaine
- New Member
- Posts: 82
- Joined: Tue Apr 27, 2010 10:45 pm
- Location: Blaine Wa
- mk
- Blue Oval Fanatic
- Posts: 917
- Joined: Wed Mar 02, 2005 1:12 am
- Location: CANADA, central Alberta
Re: will this carpet fit?
You should have no troubles with the 73-79 carpet as long as the trans hump is the same height as what you have. I've got a '79 Lariat carpet in my '68 and just had to shorten up the rear edge and a little bit where it goes under the firewall cover.
mike
mike
Always drink upstream from the herd...
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618