AC evap core
Moderator: FORDification
-
Reverend_Jay
- New Member
- Posts: 34
- Joined: Thu Aug 18, 2011 3:28 pm
AC evap core
Hey all I was wondering if it was possible to get a new evap core for a factory ac unit. does anybody make these? If so who and where do i need to go to get them? thanks in advance.
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: AC evap core
try the vendors on this page. http://www.fordification.com/links.htm
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: AC evap core
If you can't find it, here's a whole new evap with plenum for around 385:
http://www.oldairproducts.com/catalog/1 ... 15e7f9bbe9
http://www.oldairproducts.com/catalog/1 ... 15e7f9bbe9
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4