Wanted - 390 parts and 67 F100 parts needed

[davbell22602]

Wanted - 390 flex plate w/bolts and automatic 390 radiator w/bolts

[davbell22602]

Also need a good radiator support thats not rusted out.

[towtruckerfour]

The flex plate is the one between the engine and tranny right? I know it is a stupid question but wanted to make sure. I think I still have one from a 352 that I bought. They should be the same as far as I know. I don't have bolts though or inspection cover. I will look tonight.

[hazelnut]

The flex plate is the one between the engine and tranny right? I know it is a stupid question but wanted to make sure. I think I still have one from a 352 that I bought. They should be the same as far as I know. I don't have bolts though or inspection cover. I will look tonight.

A flex plate is like a flywheel for a automatic transmission.

[davbell22602]

The flex plate is the one between the engine and tranny right? I know it is a stupid question but wanted to make sure. I think I still have one from a 352 that I bought. They should be the same as far as I know. I don't have bolts though or inspection cover. I will look tonight.

It bolts onto crank wheel and torque convertor.

[towtruckerfour]

Good thing I asked. I don't have that. Sorry

[davbell22602]

Ok thanks for trying. The search is still on. I also need the automatic brake pedal pin.

[davbell22602]

Also need 390 engine mount hardware.

[davbell22602]

Also looking for power steering stuff. Power steering automatic column, steering gearbox, etc.

[davbell22602]

Also looking for a manual steering automatic steering column. 390 power steering engine mounts.

[davbell22602]

I'm also looking for 73-76 steering gearbox and automatic steering column for power steering conversion on a 67F100.

[davbell22602]

Still need parts

[70_F100]

I'm also looking for 73-76 steering gearbox and automatic steering column for power steering conversion on a 67F100.

You do realize there are quite a few more years that will work, right?

Check out the tutorial here on the site: http://www.fordification.com/tech/powersteering.htm

Best thing would be to find a donor truck, and you might also think about a disc brake upgrade at the same time, since you may have to swap out some linkage components (depending upon the year of the donor you find).

[davbell22602]

I'm also looking for 73-76 steering gearbox and automatic steering column for power steering conversion on a 67F100.

You do realize there are quite a few more years that will work, right?

Check out the tutorial here on the site: http://www.fordification.com/tech/powersteering.htm

Best thing would be to find a donor truck, and you might also think about a disc brake upgrade at the same time, since you may have to swap out some linkage components (depending upon the year of the donor you find).

If can you find a donor truck here in northern va than let me know where its at then. I cant find anything local for my 67F100. Everybody scraps anything around here. Too many junk dealers in my area. But will a spoke wheel fit a 73-79 column?

[70_F100]

Plenty of them around here, but I don't know about VA.

Will the wheel fit? Lots of discussion here: http://www.fordification.com/tech/tilt.htm