Power steering setup from 71

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 2:52 am

I have a power steering box, pump, bracket, and column from a 71 F100 390 automatic. I was going to use this in a conversion but i am having trouble finding the parts i need and i am not inclined to modify the column i have to make it work so I am going to put this stuff up for sale. As far as I know everything is in working condition. the truck was being used daily prior to the engine locking up so i am assuming everything is ok. The gear box shaft does turn and the pump does also. According to the casting number on the steering box, it is from a 77 model.

basketcase0302 · Post by **basketcase0302** » Sun Dec 18, 2011 6:42 am

Hard to find parts / good luck with the sale / hopefully go to someone here.
Just had to say this is a picture of a Ford truck I've never seen before. No floorboard in this truck, were you laying in the dirt?

davbell22602 · Post by **davbell22602** » Sun Dec 18, 2011 7:47 am

How much for the column?

Yep 77 was Fords big changeover year. I know a 73-76 would fit from what I was told.

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 10:33 am

basketcase0302 wrote:Hard to find parts / good luck with the sale / hopefully go to someone here.
Just had to say this is a picture of a Ford truck I've never seen before. No floorboard in this truck, were you laying in the dirt?

[ Image ]

Haha no. That is the donor truck all that stuff is coming out of. I am in the process of replacing the floor pans and cab mounts. It is standing up on its back in my garage. No Fred Flintstoning for me.

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 10:37 am

davbell22602 wrote:How much for the column?

Yep 77 was Fords big changeover year. I know a 73-76 would fit from what I was told.

75 plus shipping for column, steering wheel, inside and outside firewall bracket, and shifter handle. No turn signal switch

davbell22602 · Post by **davbell22602** » Sun Dec 18, 2011 11:15 am

Buckethead03 wrote:
davbell22602 wrote:How much for the column?

Yep 77 was Fords big changeover year. I know a 73-76 would fit from what I was told.
75 plus shipping for column, steering wheel, inside and outside firewall bracket, and shifter handle. No turn signal switch

The turn signal switch is missing?

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 1:05 pm

davbell22602 wrote:
Buckethead03 wrote:
davbell22602 wrote:How much for the column?

Yep 77 was Fords big changeover year. I know a 73-76 would fit from what I was told.
75 plus shipping for column, steering wheel, inside and outside firewall bracket, and shifter handle. No turn signal switch
The turn signal switch is missing?

No, the switch is there but i need it for my truck so i am taking it out.

davbell22602 · Post by **davbell22602** » Sun Dec 18, 2011 1:44 pm

Buckethead03 wrote:
No, the switch is there but i need it for my truck so i am taking it out.

I dont want the steering wheel.

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 2:22 pm

davbell22602 wrote:
Buckethead03 wrote:
No, the switch is there but i need it for my truck so i am taking it out.
I dont want the steering wheel.

ok. 75.00 plus shipping for the column without steering wheel and turn signal switch. I was throwing in the steering wheel because i don't need it either.

davbell22602 · Post by **davbell22602** » Sun Dec 18, 2011 4:05 pm

Buckethead03 wrote:
davbell22602 wrote:
Buckethead03 wrote:
No, the switch is there but i need it for my truck so i am taking it out.
I dont want the steering wheel.

ok. 75.00 plus shipping for the column without steering wheel and turn signal switch. I was throwing in the steering wheel because i don't need it either.

Ok, I just didnt want it if was being shipped still assembled on the column.

Buckethead03 · Post by **Buckethead03** » Sun Dec 18, 2011 4:31 pm

I can remove the wheel no problem. It is already loose

harrysnyder · Post by **harrysnyder** » Mon Dec 26, 2011 4:12 pm

i need the power steering pump and brackets for my 360. I dont need the steering box or column. im in SC. ship or meet?

Buckethead03 · Post by **Buckethead03** » Tue Dec 27, 2011 2:52 am

harrysnyder wrote:i need the power steering pump and brackets for my 360. I dont need the steering box or column. im in SC. ship or meet?

PM sent

Buckethead03 · Post by **Buckethead03** » Tue Dec 27, 2011 1:03 pm

Power Steering Pump and Bracket sale Pending..

Buckethead03 · Post by **Buckethead03** » Wed Feb 22, 2012 10:31 pm

all items still available.

The FORDification.com Forums

Power steering setup from 71

Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71

Re: Power steering setup from 71