c6 valve body diagram

swoodbronco · Post by **swoodbronco** » Thu Dec 22, 2011 1:34 pm

Help! I've disassembled my c6 valve body and mixed up the parts and I need a diagram with sizes of springs and balls so I can reassemble it properly

BobbyFord · Post by **BobbyFord** » Thu Dec 22, 2011 4:20 pm

This may help...these are the instructions from my TransGo shift reprogrammer kit...

swoodbronco · Post by **swoodbronco** » Thu Dec 22, 2011 6:56 pm

Thanks bobby looking for actual dimensions for springs and check balls and their location I've got a mess going think I may have lost a ball

swoodbronco · Post by **swoodbronco** » Thu Dec 22, 2011 6:58 pm

I really do appreciate your help tho! Thank you!

swoodbronco · Post by **swoodbronco** » Thu Dec 22, 2011 7:04 pm

Also wondering if a c4 kickdown lever will wok in alittle c6. Read somewhere online that they arr the
Same. Mine was broke and I tig welded it back together. I have a c4 laying around with only 84000

swoodbronco · Post by **swoodbronco** » Thu Dec 22, 2011 7:05 pm

Would hate to piece it out if anyone needs it!

Post by **FORDification** » Thu Dec 22, 2011 8:54 pm

I've got some vintage factory training manuals dealing with the C6. I'll go through them tonight after the kids go to bed and see if I can find what you're looking for.

Post by **FORDification** » Fri Dec 23, 2011 12:51 am

I found a 1970 Ford technicians handbook that might have the info you need. I just scanned and posted it to the Factory Literature Library. Check out this link, and look specifically at Page 09:

1970 Ford Automatic Transmission Valve Body Service Handbook

Let me know if this helps.

BobbyFord · Post by **BobbyFord** » Fri Dec 23, 2011 9:25 am

FORDification wrote:I found a 1970 Ford technicians handbook that might have the info you need. I just scanned and posted it to the Factory Literature Library. Check out this link, and look specifically at Page 09:

1970 Ford Automatic Transmission Valve Body Service Handbook

Let me know if this helps.

I get an error message when I click on the link.

Post by **FORDification** » Fri Dec 23, 2011 9:45 am

I just checked it again on this end with two different browsers and it's working fine for me. Can you be a bit more specific about your error message?

BobbyFord · Post by **BobbyFord** » Fri Dec 23, 2011 10:19 am

FORDification wrote:I just checked it again on this end with two different browsers and it's working fine for me. Can you be a bit more specific about your error message?

It seems to be working now

Post by **FORDification** » Fri Dec 23, 2011 10:29 am

Hmmm....I just checked it again and got an error message this time. Looking into it.

swoodbronco · Post by **swoodbronco** » Fri Dec 23, 2011 1:08 pm

Worked on my end this morning. Should be able to figure it out from here. Anyone know if c6 and c4 kickdown arms interchange?

swoodbronco · Post by **swoodbronco** » Fri Dec 23, 2011 7:48 pm

I really appreciate your help FORDification!

tpls63 · Post by **tpls63** » Sat Apr 12, 2014 2:26 pm

I have a part out of the valve body from my C6 that I don't know where it goes and I'm hoping someone here can help. It can out of one of the valves inside the long cover and the part is 26/64" long tip to tip, 23/64" long at the body and 13/64" diameter. The only place it seems to fit is inside the white spring on the 1-2 shift valve but before I put it back together I want to be sure. Here is a picture of the piece:

Image1.jpg

The part number on the valve body is RF C7AP 71092-F
I hope you can help, and thanks in advance!!

The FORDification.com Forums

c6 valve body diagram

c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram

Re: c6 valve body diagram