All C-6 lines the same?

cole71 · Post by **cole71** » Tue Apr 17, 2012 10:05 pm

I'm looking at putting a set of stainless steel trans cooler lines on my C-6 from inline tube.

My truck was originally a 3 speed on the column and I took a C-6 out of a 78 dent side.

My question is, are all the lines the same? or will I need to buy a set for a 78?

Thanks, Cole

Donnie · Post by **Donnie** » Wed Apr 18, 2012 9:43 am

The fittings on all C6's are the same size..Where you may run into problems is the bends & configurations used on different body & engine styles.
May I ask why you are using stainless? Are you building a show truck? If not, you can use Bundy flex brake line from any auto supply...Donnie

Kurt Combs · Post by **Kurt Combs** » Wed Apr 18, 2012 10:00 am

The lines have different configurations, dependent on the radiator's lower tank.

cole71 · Post by **cole71** » Wed Apr 18, 2012 10:02 am

How would one figure out which lines to get? I'll check the radiator off the donor, but i believe there pretty close to my 71 radiator.

cole71 · Post by **cole71** » Wed Apr 25, 2012 3:36 pm

anyone else?

BobbyFord · Post by **BobbyFord** » Wed Apr 25, 2012 7:04 pm

Buy stainless steel tube stock and a bender and bend your own. Use the cheapy stock crap from your local parts store first to make some patterns.

The FORDification.com Forums

All C-6 lines the same?

All C-6 lines the same?

Re: All C-6 lines the same?

Re: All C-6 lines the same?

Re: All C-6 lines the same?

Re: All C-6 lines the same?

Re: All C-6 lines the same?