new yoke for tranny!

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
gregamorton
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 935
Joined: Mon Jun 15, 2009 7:57 pm
Location: Blossom TX

new yoke for tranny!

Post by gregamorton »

can any body help with a transmission yoke for my 1978 rug 3 speed overdrive? I dont have any of my yokes that fit at all and dont know where to start looking. Any help would be apreciated. It is a slip style. thanks Greg
1967 mercury F350 7.3 IDI ats turbo kit c6 gear vendor overdrive 3.73s rolling on 19.5s
1971 sport custom on 1979 f350 highboy frame 460 c6 np205 dana 60s 3.54s
1974 F100 baby blue & rust 240 3 speed 3.70s sitting on the ground!
1990 F250 extended cab FI460 e40d 3.55s daily driver
Possibly looking for my next bump right now!
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: new yoke for tranny!

Post by basketcase0302 »

Greg,
Count the splines on the output shaft from the tranny and contact these guys with your model of transmission and what series of u-joint is in the truck:
http://www.neapco.com/
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply