Uncovered my transmission plate today and it is listed as shown below;
RAT BS
013518
Any information would be great. It is currently sitting in a 1970 F100.
Thanks
Andy
Transmission Plate
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 190
- Joined: Thu Jan 22, 2009 11:45 am
- Contact:
Re: Transmission Plate
Can't help you with the code since I don't have a codebook handy.
However, I could not help but notice that you have a some RAT BS there.
However, I could not help but notice that you have a some RAT BS there.
mmerlinn (http://mmerlinn.com/catalog/makeridx.htm)
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Transmission Plate
Andy,
I couldn't find your numbers here in the tranny ID tutorial but thought the pictures might help:
http://www.fordification.com/tech/transID-man.htm
And don't worry about the post right above mine it's a spammer, (been reported to admin to be removed).
I couldn't find your numbers here in the tranny ID tutorial but thought the pictures might help:
http://www.fordification.com/tech/transID-man.htm
And don't worry about the post right above mine it's a spammer, (been reported to admin to be removed).
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- 67mann
- 100% FORDified!
- Posts: 1705
- Joined: Thu Feb 07, 2008 7:19 am
- Location: NY..Mt.Morris 3rdgen. homestead
Re: Transmission Plate
No B S here( ) it's not listed http://www.davidkeetoploaders.com/3speedidchart.htm but you can get some info this site about your 3spd TL
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
http://s267.photobucket.com/albums/ii304/67mann/