Custom gauge cluster

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Custom gauge cluster

Post by basketcase0302 »

7mm equals to #6
8,5mm equals to?
From here I get the your measurement converted to .33465:
http://www.worldwidemetric.com/measurements.html

I used tinnerman clips on the screw-hole tabs of the dash on my F-600 panel similar to these:
http://www.ebay.com/itm/100-10-Tinnerma ... 4997872%26
My quick search didn't reveal the longer type in a #8 size. And i then got my screws, (I used stainless) to match similar to these, (but I believe they too were a #8. :hmm:
http://www.ebay.com/itm/251100091481?ss ... 1423.l2649
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Top
Post Reply

Return to “Interior”