Hello,
I just started restoring my dad's 1969 f100 that he bought in 1972 and I am changing out the cab because of rust issues.
I found a replacement cab but its a 70...im going to switch them out and i read in the tutorials that there is a difference between the tanks and the bolts.
Is it possible to install the gas tank in the new cab or should i be looking for a 70 gas tank?
if its possible to install? what do i need to do to install it?
thank you,
Jorge Garcia
69 Gas Tank in 70 Cab
Moderator: FORDification
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 69 Gas Tank in 70 Cab
Jorge,
If you scroll about half way down this page you'll find your answer:
http://www.fordification.com/tech/67-72ID_01.htm
If you scroll about half way down this page you'll find your answer:
http://www.fordification.com/tech/67-72ID_01.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4