Hi Guys,
I have a late 70's Ford Truck 2WD Steering Column for sale, complete with steering wheel. I have never used it, and don't know much about it, so it will be sold "as is".
Here's the Scoop:
I converted my 71 Truck to a Tilt Steering Column recently, and needed the rag joint flange that goes on the end of the column. My mechanic told me about an old gentleman here locally that has old Ford Truck parts - so I contacted him. He sold me the flange on the end of the steering column - and gave me the whole steering column with it!
I was thinking about wiping it down, and putting it on E Bay, but figured somebody here may need it. I haven't ever used it, and it would be sold "as is". If anyone wants to make me an offer, then fine. I don't need it.
When I purchased mt column the shipping was approx. $30. So, keep that in mind.
Thanks,
Bob
Late 70's 2WD Steering Column
Moderator: FORDification
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Late 70's 2WD Steering Column
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
danno
- Preferred User
- Posts: 250
- Joined: Sun Dec 30, 2007 12:46 am
- Location: Ocala,Florida
Re: Late 70's 2WD Steering Column
Could you post picture of it or text it to me
65 f-100 4wd short bed 360engine c-6 tranny
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
Will do it today.danno wrote:Could you post picture of it or text it to me
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
Here are some pictures of the Steering Column. I haven't had time to clean it up yet, at all:
You can see here one little area that I wiped off - I think it will clean up okay:
Here again on the top of the Steering Wheel - I wiped it off, and it looks okay:
I'd like to get $75.00 + shipping for this. I haven't used it, so I'm selling it "as is". But, I wouldn't put it on here if I didn't think it was functional, and could do somebody some good.
Bob
You can see here one little area that I wiped off - I think it will clean up okay:
Here again on the top of the Steering Wheel - I wiped it off, and it looks okay:
I'd like to get $75.00 + shipping for this. I haven't used it, so I'm selling it "as is". But, I wouldn't put it on here if I didn't think it was functional, and could do somebody some good.
Bob
You do not have the required permissions to view the files attached to this post.
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Late 70's 2WD Steering Column
How are the upper and lower bushings and has the turn signal switch been ohmed out? 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
danno
- Preferred User
- Posts: 250
- Joined: Sun Dec 30, 2007 12:46 am
- Location: Ocala,Florida
Re: Late 70's 2WD Steering Column
can we do better on the price,Maybe like 65.00 shipped
65 f-100 4wd short bed 360engine c-6 tranny
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
PM Sentdanno wrote:can we do better on the price,Maybe like 65.00 shipped
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
danno
- Preferred User
- Posts: 250
- Joined: Sun Dec 30, 2007 12:46 am
- Location: Ocala,Florida
Re: Late 70's 2WD Steering Column
Didn't get the PM, Try again please
65 f-100 4wd short bed 360engine c-6 tranny
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
Sent another PM, along with an e-mail.danno wrote:Didn't get the PM, Try again please
Bob
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
danno
- Preferred User
- Posts: 250
- Joined: Sun Dec 30, 2007 12:46 am
- Location: Ocala,Florida
Re: Late 70's 2WD Steering Column
To much for me! Thanks Anyway
65 f-100 4wd short bed 360engine c-6 tranny
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
Okie Dokie. No Problemo.
Can we do better on the price,Maybe like 65.00 shipped
To much for me! Thanks Anyway
Can we do better on the price,Maybe like 65.00 shipped
To much for me! Thanks Anyway
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
-
Corkwheats
- New Member
- Posts: 151
- Joined: Tue Nov 20, 2012 4:23 am
- Location: U.P. of Michigan
- Contact:
Re: Late 70's 2WD Steering Column
I think I can figure out how to ohm out the turn signal - and will list the results, good or bad.basketcase0302 wrote:How are the upper and lower bushings and has the turn signal switch been ohmed out?
The steering wheel seems to rotate smoothly - I'll investigate how to double check the bushings, as well.
Bob
71 Ranger XLT LB 2WD
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe
Tilt Steering, West Coast Mirrors
390, 9.5-1 C.R., Holley 600, D2 Heads, C-6
Custom Grind Oregon Cam
Flotech Headers, 2.5" Duals w/H-Pipe