302 Engine Frame mounts
Moderator: FORDification
-
- New Member
- Posts: 71
- Joined: Sat Sep 29, 2012 11:29 pm
302 Engine Frame mounts
I have looked at all of the other threads pertaining to these perches. Most were left kind of open ended so I'll start my on. I have a 68 F100 with a 240 six cylinder and I have a 302 engine that I want to put in it. I need both frame engine mounts to install it. Zip is 33801 and I'll gladly pay a fair price and shipping for a nice set. Truck is a standard shift column without power steering if it makes a difference. Thank you
68 Ford F-100, two wheel drive short bed. 46k original miles, was a 240 six cylinder 3 on the tree. Changed to a 347 stroker with a C6, 03 Crown Vic front end, lunar green. Torn completely apart for a frame off fun daily driver project.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 302 Engine Frame mounts
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
- New Member
- Posts: 9
- Joined: Wed Feb 13, 2013 12:02 pm
Re: 302 Engine Frame mounts
I have a set from a 72 bronco, don't know if they will fit!
-
- New Member
- Posts: 71
- Joined: Sat Sep 29, 2012 11:29 pm
Re: 302 Engine Frame mounts
Thanks, I bought Marks mounts from him.
68 Ford F-100, two wheel drive short bed. 46k original miles, was a 240 six cylinder 3 on the tree. Changed to a 347 stroker with a C6, 03 Crown Vic front end, lunar green. Torn completely apart for a frame off fun daily driver project.
-
- Blue Oval Fan
- Posts: 663
- Joined: Sat Aug 20, 2011 3:05 am
- Location: Seattle Washington
Re: 302 Engine Frame mounts
Hope they work for you!wrongway wrote:Thanks, I bought Marks mounts from him.