Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

Post Reply
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

Parts off the top of my head are as fallows.

Driver and passenger door (72 F100) nothing a tiny bit of bondo wont fix.
Bench seat (a little rusty and needs covering, but def. reusable) 68 f100 ranger
68 gauge cluster (good shape)
2 72 gauge clusters. (faded but circuit boards are in AWESOME shape)
68 and 72 steering column.
Tail light lenses (good condition) multiple sets.
72 clear and amber front turn signal lenses (clear are new from lmc)
heater controls (68)
2 Radio bezels (good condition)
Heater box (68)
72 grill (no bends could def use a polish)
gas tank (behind seat good condition)
drive shaft (was told it was from a 68 with 6 cyl motor and 9 inch rear, def different than my 72 and my brothers 70, bothare original 302 trucks) good condition.
hazard switch (68)
Column cover (68 or 72) prob the same?
68 steel, and 72 aluminum head light doors. (steel are white) not the best condition, but usable)
wiring harness kit (brand new in box) everything to rewire 67-72 f100 (almost any older model car?truck for that matter) its an "E-Z Wiring Kit" "model "EZ-21"
rear cargo lens (glass) ranger.
Original jack I refurbished (looks and works good) (THINK I have the handle and fastener too)
68 Steering wheel (3 spoke) a crack or two in the plastic, but with a new coat of black paint itll look good (its in my truck right now)
arm rests (doors)
fender in good shape with original stainless trim (68)
2 fenders (one with a little bondo other with none both in good shape 72)
seat belts from 72 (blue) driver, center, passenger)
back window in good shape from 72
vent window assemblies




I know I have tons of other stuff Just ask. PM (ill upload pictures as soon as I remember my photo bucket password)
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
676870F100
New Member
New Member
Posts: 88
Joined: Sun Oct 30, 2011 8:35 pm
Location: Deltona Florida

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 676870F100 »

looking for a good used steering wheel? have pics?
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

Ill get pics tomorrow when the suns out. to dark right now.
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
frankentrucks
New Member
New Member
Posts: 23
Joined: Fri May 11, 2012 11:53 pm

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by frankentrucks »

Interested in the blue seat belts
1972 Ford F100 Custom LWB Fleetside, 408W, RUG Toploader 4 speed, 3.70 9-inch with Locker
1965 Ford F100 Custom Cab SWB Flairside, Built 428 FE, C6 trans, 3.89 9-inch with Locker
crazyhorse
100% FORDified!
100% FORDified!
Posts: 1514
Joined: Sun Jan 27, 2008 9:24 pm

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by crazyhorse »

Interested in the '72 front park light lens and the '72 cargo light lens.
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

(lenses) Ill put pics up of everything I have this weekend. If you see something you want then just shoot me a pm and we'll work out price, shipping, ect.!
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

Also have a manual steering box from a 72 and a power steering box from I BELIEVE a 68. Bendix style.
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
max03
New Member
New Member
Posts: 222
Joined: Thu Nov 11, 2010 12:25 pm
Location: Pine Bluff, Arkansas

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by max03 »

is the 68 column for a manual or auto?
72 lwb sport custom, 300/3spd
pdb,ps, ac 3.70:1
68-swb 300/3spd sold
69-lwb 390/c6 sold
69-swb 240/c4 sold
72-swb ranger xlt 360/c6 sold
72-swb sport custom 302/3spdsold
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

The column is for an auto.
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
72customF
New Member
New Member
Posts: 114
Joined: Sat Nov 26, 2011 4:09 pm
Location: fort lauderdale Fl

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 72customF »

UPDATE!!! HAVE WAY MORE STUFF THAN I REMEMBERED. MANUAL CHOKE CABLE WITH TRIM RING AND KNOB, HEADLIGHT SWITCH, TURN SIGNAL SOCKET AND ASSEMBLIES FOR ALL YEARS, E-BRAKE ASSEMBLIES, GAS PEDAL WITH LINKAGE, TRANS LINKAGE, 72 SIDE HOOD EMBLEMS, WIPER SWITCH WITH TRIM RING AND KNOB, WINDOW REGULATORS, CHROME 302/351 VALVE COVERS, CHROME THERMOSTAT HOUSINGS BRAND NEW IN PACKAGE FOR 302/351, CHROME VALVE COVER BOLTS BRAND NEW (TRANS DAP), HOLLEY CHROME AIR CLEANER, TONS OF 72 HEAD LIGHT DOORS, 68 STEEL HEADLIGHT DOORS, WINDSHIELD WIPER ARMS, WINDSHIELD WIPER ARMS THAT CONNECT TO WIPER MOTOR, (THINK i HAVE A GOOD WIPER MOTOR ALSO), TRANS CROSS MEMBER, SO MUCH STUFF IT'S HARD TO LIST. PM ME IF YOU NEED SOMETHING AND I ALMOST CERTAINLY HAVE IT! NOT TRYING TO GET RICH JUST TRYING TO MAKE MY LIVING ROOM AND EXTRA BEDROOM LIVEABLE AGAIN SO MY OLD LADY GETS OFF MY BACK! ;)


THANKS, MIKE.
Mike- (72 SWB Chassis, 68 Ranger body, 69 Ranger grill) 72 302 bored 30 over, 69 351w heads light port work, Erson TQ20H cam, Weiand Stealth intake, Edelbrock 1406 carb, MSD 6T circle track ignition controller, C4 with transgo shift kit, Ford 9inch rear with Eaton Truetrac LSD. Much more in the works!
Image Image Image
max03
New Member
New Member
Posts: 222
Joined: Thu Nov 11, 2010 12:25 pm
Location: Pine Bluff, Arkansas

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by max03 »

Interested in the heater switch, glove box mounted emergency flasher switch shipping to 71601.

Also needing the headlight switch retaining nut and 4 Incab fuel sending unit bolts if you have that stuff aswell?!

Thanks
72 lwb sport custom, 300/3spd
pdb,ps, ac 3.70:1
68-swb 300/3spd sold
69-lwb 390/c6 sold
69-swb 240/c4 sold
72-swb ranger xlt 360/c6 sold
72-swb sport custom 302/3spdsold
676870F100
New Member
New Member
Posts: 88
Joined: Sun Oct 30, 2011 8:35 pm
Location: Deltona Florida

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 676870F100 »

good luck on trying to contact him
BLS2042
New Member
New Member
Posts: 28
Joined: Wed Oct 10, 2012 9:27 pm
Location: Houston,Texas

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by BLS2042 »

Do you have metal door panels for a 67?
69CustomCab
New Member
New Member
Posts: 9
Joined: Tue Feb 26, 2013 11:11 pm

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 69CustomCab »

How much for the aluminum headlight doors?
User avatar
69Ford
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 790
Joined: Tue Sep 11, 2012 9:59 pm
Location: Minnesota

Re: Sorry To Anyone Trying To Get In Touch. STILL HAVE PARTS

Post by 69Ford »

Do you have any wiring harness Need the one from inside the cab to coil. Also alternator wiring harness for a 69F100.
1969 Ford F100 Styleside standard cab 360 C6
Post Reply