1969-parting out (UPDATED)

[bbyrnes1]

This is not the original post but I figure I'll update this one rather than clog up the forum with a new post.

I am parting out my 69. Would rather take what I can get for it to help pay a student loan rather than keep putting $ into it. It has some great parts on it that are still available.

Manual steering box with less than 500 miles on it
New steerling linkage
Axles with new king pins
New shocks
Leaf springs
Coil springs
New radiator
New wheels/tires
240 inline 6
C4 transmission
Dash pad with fresh recover
Cab with new floorpans and rear corners
Grill
EFI exhaust manifolds
Front bumper
Tailgate
Heater box with new heater core
Instrument cluster

I have other parts, these are just the noteworthy ones I can think of.

Thanks,
Brandon

[guhfluh]

Do you have pictures of the headlight bezels? I need some steel ones with no dents to powdercoat.

[bbyrnes1]

Do you have pictures of the headlight bezels? I need some steel ones with no dents to powdercoat.

20130822_173656.jpg

They have no dents.

[sargentrs]

Side mount fuel tank? What transmission and for what engine?

[bbyrnes1]

Side mount fuel tank? What transmission and for what engine?

In-cab fuel tank. 240 inline 6 mounted to a c4.

[sargentrs]

I was hoping for a small block C6. Thanks though. A/C? How's your tailgate or your fender wells inside the bed?

[ryanof100]

looking for door sills, headliner and headliner trim

[guhfluh]

I wish you were closer. I've been wanting to get a spare 240/300 to build.

How much for the headlight bezels and how to pay? 70364 is my zip

[bbyrnes1]

I wish you were closer. I've been wanting to get a spare 240/300 to build.

How much for the headlight bezels and how to pay? 70364 is my zip

Houma is only about 10 hours from here . Make me an offer on the headlight bezels. Cash or check. You can PM me if you like.

[cbwheels]

Which trim level interior door panels and what kind of shape? Pictures? , $ to 60441 ?

[bbyrnes1]

Which trim level interior door panels and what kind of shape? Pictures? , $ to 60441 ?

I'm not sure what trim level they are, but both are in good shape. No dents or bends.

20130829_172714.jpg

[bbyrnes1]

I was hoping for a small block C6. Thanks though. A/C? How's your tailgate or your fender wells inside the bed?

Sorry Randy, I just saw this post. No a/c. The tailgate isn't perfect, but it's in good shape. One bend on the passenger edge, a very small dent on the top edge and bottom, and some small pitting under the "D". I'm not planning on cutting anything off the truck, I'm done working on it, but the bed wheelwells have some minor dents but zero rust.

20130829_173215.jpg

[sargentrs]

Thanks. But mine's in about the same condition so I'll just fiddle with what I've got.

[habu]

Do you have the brackets for the mirrors, assuming you have the west coast mirrors ?

I have a set of mirrors but no brackets.

Thanks

[bbyrnes1]

I do nt have west coast mirrors.