Door tag axle code needed
Moderators: FORDification, 70_F100
-
junkyardjeff
- New Member
- Posts: 153
- Joined: Sun Aug 15, 2004 10:38 am
- Location: Dayton Ohio
Door tag axle code needed
Found a 70 to 72 f100 in a junkyard that I would like to get the rear end out of it for my 66,it has a axle code of what looks to be 17 on the data tag so is there anyone with a shop manual who can get me the ratio for that code. It was too wet to crawl under it to look at that tag and might be time for me to get shop manuals for those years.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Door tag axle code needed
Axle codes are down toward the bottom of the page. Looks like 17 is a 3.25 ratio. http://www.fordification.com/tech/VIN70.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
junkyardjeff
- New Member
- Posts: 153
- Joined: Sun Aug 15, 2004 10:38 am
- Location: Dayton Ohio
Re: Door tag axle code needed
Thanks for the info and thought there is a area to check the door tag,I looked and only found the axle tag decoder.