Parting 3 bumps! Let me know what you might need.
Moderator: FORDification
-
- New Member
- Posts: 80
- Joined: Sat Oct 05, 2013 6:29 pm
- Location: Tampa, FL
Re: Parting 3 bumps! Let me know what you might need.
Drivers window regulator?
69 F100 - Coyote - Gen II Flavor
-
- New Member
- Posts: 67
- Joined: Sun Sep 15, 2013 1:04 am
- Location: Custer, S.D.
Re: Parting 3 bumps! Let me know what you might need.
I have some! PM sent!
-
- New Member
- Posts: 5
- Joined: Sun Mar 09, 2014 3:29 pm
Re: Parting 3 bumps! Let me know what you might need.
Looking for a few items, do you have?
Visors (4 screws model) for a 72.
Dome light cover
Red light lens on the bed just after the bump (don't know what it's called)
Visors (4 screws model) for a 72.
Dome light cover
Red light lens on the bed just after the bump (don't know what it's called)
-
- New Member
- Posts: 4
- Joined: Fri Oct 05, 2012 8:54 am
- Location: Raleigh, NC
Re: Parting 3 bumps! Let me know what you might need.
I need a drive shaft for a 3 speed manual short wheel base.
-
- New Member
- Posts: 80
- Joined: Sat Oct 05, 2013 6:29 pm
- Location: Tampa, FL
Re: Parting 3 bumps! Let me know what you might need.
Parts received from OP today, very nice! Good seller here!
69 F100 - Coyote - Gen II Flavor
-
- 100% FORDified!
- Posts: 1671
- Joined: Thu Oct 13, 2011 9:39 am
- Location: Windsor, CO
- Contact:
Re: Parting 3 bumps! Let me know what you might need.
Do you have a steering wheel off the 70? What color and a pic if possible.48prerunner wrote:Steering wheel off of one of the 70s Have one without cracks? thanks
""Never shoot a large caliber man with a small caliber bullet."
2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
- wrkjim
- New Member
- Posts: 39
- Joined: Sun Jul 11, 2010 3:32 pm
- Location: Tennessee
Re: Parting 3 bumps! Let me know what you might need.
Hi, Looking for a dipstick tube for 2 wd 390, also interior headliner and chrome trim pieces for 68 f250.
1968 F250 4X4
- tnab1970
- New Member
- Posts: 181
- Joined: Mon Apr 22, 2013 12:48 pm
- Location: Cleburne, Texas
Re: Parting 3 bumps! Let me know what you might need.
Looking for headliner trim for 1970 model?
-
- New Member
- Posts: 67
- Joined: Sun Sep 15, 2013 1:04 am
- Location: Custer, S.D.
Re: Parting 3 bumps! Let me know what you might need.
wrkjim wrote:Hi, Looking for a dipstick tube for 2 wd 390, also interior headliner and chrome trim pieces for 68 f250.
I have a few sets of headliner trim. Are you looking for painted or chrome?tnab1970 wrote:Looking for headliner trim for 1970 model?
Thanks!
.
-
- New Member
- Posts: 225
- Joined: Mon Oct 03, 2011 7:04 pm
Re: Parting 3 bumps! Let me know what you might need.
Any chance you have a v8 gas pedal?
-
- New Member
- Posts: 67
- Joined: Sun Sep 15, 2013 1:04 am
- Location: Custer, S.D.
Re: Parting 3 bumps! Let me know what you might need.
Zukinut wrote:Any chance you have a v8 gas pedal?
PM sent!
- Kurt Combs
- Blue Oval Guru
- Posts: 1341
- Joined: Sat Apr 22, 2006 11:12 pm
- Location: California, Lakeport
Re: Parting 3 bumps! Let me know what you might need.
Do you have the rear end spring perch for the forward, right side? You previously said you had the part and you would check it out and get pictures, just wondering if I missed a PM.
Thanks, Kurt
Thanks, Kurt
Kurt
1972 F-250
1972 F-250
-
- New Member
- Posts: 4
- Joined: Thu Apr 26, 2012 11:00 pm
Re: Parting 3 bumps! Let me know what you might need.
Do you by chance have a decent core support?
-
- New Member
- Posts: 60
- Joined: Mon May 12, 2014 4:58 pm
- Location: Tampa, FL
Re: Parting 3 bumps! Let me know what you might need.
Do you have tail light trim (both sides), fan shroud, if the gauges work I would be interested in the entire cluster behind the panel, how are the dash pads, also what mirrors do they have? Looking for both sides west coast jrs.
Thanks
Thanks
Dan
Tampa FL
1969 F100 SWB 4x4
Tampa FL
1969 F100 SWB 4x4
-
- New Member
- Posts: 4
- Joined: Thu May 29, 2014 10:45 am
- Location: Hayden Idaho
Re: Parting 3 bumps! Let me know what you might need.
does any of them have factory a/c, I need the a/c lines for a 1972 camper special and heater hoses