Parting 3 bumps! Let me know what you might need.

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

Post Reply
rumblin46
New Member
New Member
Posts: 80
Joined: Sat Oct 05, 2013 6:29 pm
Location: Tampa, FL

Re: Parting 3 bumps! Let me know what you might need.

Post by rumblin46 »

Drivers window regulator?
69 F100 - Coyote - Gen II Flavor
straight-shot
New Member
New Member
Posts: 67
Joined: Sun Sep 15, 2013 1:04 am
Location: Custer, S.D.

Re: Parting 3 bumps! Let me know what you might need.

Post by straight-shot »

I have some! PM sent!
dwil
New Member
New Member
Posts: 5
Joined: Sun Mar 09, 2014 3:29 pm

Re: Parting 3 bumps! Let me know what you might need.

Post by dwil »

Looking for a few items, do you have?

Visors (4 screws model) for a 72.
Dome light cover
Red light lens on the bed just after the bump (don't know what it's called)
burkhart1202
New Member
New Member
Posts: 4
Joined: Fri Oct 05, 2012 8:54 am
Location: Raleigh, NC

Re: Parting 3 bumps! Let me know what you might need.

Post by burkhart1202 »

I need a drive shaft for a 3 speed manual short wheel base.
rumblin46
New Member
New Member
Posts: 80
Joined: Sat Oct 05, 2013 6:29 pm
Location: Tampa, FL

Re: Parting 3 bumps! Let me know what you might need.

Post by rumblin46 »

Parts received from OP today, very nice! Good seller here!
69 F100 - Coyote - Gen II Flavor
Madman
100% FORDified!
100% FORDified!
Posts: 1671
Joined: Thu Oct 13, 2011 9:39 am
Location: Windsor, CO
Contact:

Re: Parting 3 bumps! Let me know what you might need.

Post by Madman »

:yt:
48prerunner wrote:Steering wheel off of one of the 70s Have one without cracks? thanks
Do you have a steering wheel off the 70? What color and a pic if possible.
""Never shoot a large caliber man with a small caliber bullet."

2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
User avatar
wrkjim
New Member
New Member
Posts: 39
Joined: Sun Jul 11, 2010 3:32 pm
Location: Tennessee

Re: Parting 3 bumps! Let me know what you might need.

Post by wrkjim »

Hi, Looking for a dipstick tube for 2 wd 390, also interior headliner and chrome trim pieces for 68 f250.
1968 F250 4X4
User avatar
tnab1970
New Member
New Member
Posts: 181
Joined: Mon Apr 22, 2013 12:48 pm
Location: Cleburne, Texas

Re: Parting 3 bumps! Let me know what you might need.

Post by tnab1970 »

Looking for headliner trim for 1970 model?
straight-shot
New Member
New Member
Posts: 67
Joined: Sun Sep 15, 2013 1:04 am
Location: Custer, S.D.

Re: Parting 3 bumps! Let me know what you might need.

Post by straight-shot »

wrkjim wrote:Hi, Looking for a dipstick tube for 2 wd 390, also interior headliner and chrome trim pieces for 68 f250.
tnab1970 wrote:Looking for headliner trim for 1970 model?
I have a few sets of headliner trim. Are you looking for painted or chrome?
Thanks!



.
Zukinut
New Member
New Member
Posts: 225
Joined: Mon Oct 03, 2011 7:04 pm

Re: Parting 3 bumps! Let me know what you might need.

Post by Zukinut »

Any chance you have a v8 gas pedal?
straight-shot
New Member
New Member
Posts: 67
Joined: Sun Sep 15, 2013 1:04 am
Location: Custer, S.D.

Re: Parting 3 bumps! Let me know what you might need.

Post by straight-shot »

Zukinut wrote:Any chance you have a v8 gas pedal?

PM sent!
User avatar
Kurt Combs
Blue Oval Guru
Blue Oval Guru
Posts: 1341
Joined: Sat Apr 22, 2006 11:12 pm
Location: California, Lakeport

Re: Parting 3 bumps! Let me know what you might need.

Post by Kurt Combs »

Do you have the rear end spring perch for the forward, right side? You previously said you had the part and you would check it out and get pictures, just wondering if I missed a PM.

Thanks, Kurt
Kurt
1972 F-250
72Frankenford
New Member
New Member
Posts: 4
Joined: Thu Apr 26, 2012 11:00 pm

Re: Parting 3 bumps! Let me know what you might need.

Post by 72Frankenford »

Do you by chance have a decent core support?
DDAN1130
New Member
New Member
Posts: 60
Joined: Mon May 12, 2014 4:58 pm
Location: Tampa, FL

Re: Parting 3 bumps! Let me know what you might need.

Post by DDAN1130 »

Do you have tail light trim (both sides), fan shroud, if the gauges work I would be interested in the entire cluster behind the panel, how are the dash pads, also what mirrors do they have? Looking for both sides west coast jrs.
Thanks
Dan
Tampa FL
1969 F100 SWB 4x4
Kelly
New Member
New Member
Posts: 4
Joined: Thu May 29, 2014 10:45 am
Location: Hayden Idaho

Re: Parting 3 bumps! Let me know what you might need.

Post by Kelly »

does any of them have factory a/c, I need the a/c lines for a 1972 camper special and heater hoses
Post Reply