Clunk when stopping and starting. Transmission?

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

BigRedTruck
Preferred User
Preferred User
Posts: 328
Joined: Mon Jul 19, 2004 1:24 am
Location: Texas, Lubbock
Contact:

re: Clunk when stopping and starting. Transmission?

Post by BigRedTruck »

same thing has happened to me but I thought it was just a rough gearshift ...it does not hapen all the time mostly during sudden starts. i'll look into this.
69 F-100 2wd 360 cid C6
Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum immane mittam.

I have a catapult. Give me all the money, or I will fling an enormous rock at your head
User avatar
mrung0wa
Blue Oval Fan
Blue Oval Fan
Posts: 612
Joined: Mon Mar 28, 2005 6:31 am
Location: Soon in Olympia,WA
Contact:

re: Clunk when stopping and starting. Transmission?

Post by mrung0wa »

I had that very same problem with my 76 Bronco.
The combination of high mileage and lack of lubrication led to spending a chunk of :$$: cash :$$: to have the slip-yoke replaced and that fixed my problem...

Lawrence 8)
http://www.fordification.com/galleries/ ... ?pos=-2746

FOR SALE: 64 Galaxie 390HiPo C6 (Project Car)
SOLD! 69 F100 Contractor SPECIAL 300 I6 "Jethro"
01 BMW 325i 4DR E46(Wife's car)
03 EXPEDITION XLT FX4(2WD/AWD/4WD) 5.4L K&N FipK

"I beat my head against the wall, Because it feels good when I stop."
tex4431
New Member
New Member
Posts: 5
Joined: Sun Feb 12, 2006 9:50 am
Contact:

Re: Clunk when stopping and starting. Transmission?

Post by tex4431 »

Check your radius arm bushings for wear.
Ozark Tim wrote:My 72 F-100 has had this problem for some time and it hasnt gotten worse but it is anoying. I am hoping one of you all have experianced something like this to point me in the right direction. The truck is a 72 F-100 with 360 & C6.
When you come from road speeds to a stop at a light etc. if after you have come to a complete stop you momentarily let off the brake enough for the truck to move forward a bit it clunks like it never shifted all the way down to first when stopping.
When you start from a stop it clunks also and if you baby it you can keep it from doing so all together. You can also baby it for up to midway into 1st gear and if you accelerate harder at that point still feel the clunk.
All motor and transmission mounts are good, and all three u-joints and carrier bearing have been replaced and it did it before and after.
Personally I think it does some odd delayed downshift, but I have never owned a C6 in this vintage truck to have experianced this problem.
Any suggestions?
Thanks, OT
Post Reply