A couple questions about the swap on a 1978 F100 400 3.03 to a T-18:
1. Will I need a shorter drive shaft?
2. The 3.03 has a junk floor conversion by Mr Gasket. Will I need to fab a need trans tunnel?
1978 F100 400 trans swap questions
Moderators: FORDification, 70_F100
-
BCSO290
- New Member
- Posts: 9
- Joined: Thu May 29, 2014 11:30 pm
-
cep62
- 100% FORDified!
- Posts: 2062
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: 1978 F100 400 trans swap questions
The driveshaft will probably be different.
You will need the bolt on cover for the trans tunnel.
if you don't already have a bolt on over you just need to cut the hole.
You will need the bolt on cover for the trans tunnel.
if you don't already have a bolt on over you just need to cut the hole.