Parting 3 bumps! Let me know what you might need.

habu · Post by **habu** » Mon Jun 02, 2014 4:52 pm

If any have power brakes... I'm looking for the plastic piece that goes between the back of the booster to or into the firewall. The shaft of the booster that connects to the brake pedal goes inside of this. Mine crumbled.

Also looking for the brake warning light.
Can do paypal.

myoldtrucks · Post by **myoldtrucks** » Fri Jun 06, 2014 9:56 am

Hello.

I need solid patch panels for both front fenders. I need the lower section behind the wheel.

Also need outside mirrors.

Need fan shroud for 302.

Thanks!

Bill

towtruckerfour · Post by **towtruckerfour** » Sat Aug 02, 2014 8:57 pm

Do you by chance have the hardware for the body moulding? Thanks

Chuck2422 · Post by **Chuck2422** » Sun Aug 03, 2014 8:07 pm

I am looking for a core support if you have one.

joebig · Post by **joebig** » Sun Aug 03, 2014 10:11 pm

Do you have a heater control for a 69 f100. I believe 69-72 are the same...with cables if possible, like pics.

heater_control.jpg

heater_control2.jpg

straight-shot · Post by **straight-shot** » Sun Aug 03, 2014 11:22 pm

PM's sent.
Thanks!

ltteg · Post by **ltteg** » Mon Aug 04, 2014 7:11 am

Need a 6 cyl radiator with grill side mounts

joebig · Post by **joebig** » Mon Aug 04, 2014 9:48 pm

Do you have the wires and socket that plugs into the dome light door jam switch? I have the switch but looking to splice onto existing wires. I believe 69-72 are the same. I'll take with switch also if you want.

straight-shot · Post by **straight-shot** » Mon Aug 04, 2014 11:54 pm

pm sent!

Abrams · Post by **Abrams** » Wed Aug 06, 2014 5:08 pm

Hey, would you have a set of black sun visors?
Thanks
A

Corkwheats · Post by **Corkwheats** » Wed Aug 06, 2014 6:12 pm

Need an Oil Pan for my 71 F100 w/390.

Rear Sump - must be in very good condition.

Last two I put on both leaked!

Bob

tnab1970 · Post by **tnab1970** » Thu Aug 07, 2014 1:09 pm

straight-shot wrote:
wrkjim wrote:Hi, Looking for a dipstick tube for 2 wd 390, also interior headliner and chrome trim pieces for 68 f250.

tnab1970 wrote:Looking for headliner trim for 1970 model?
I have a few sets of headliner trim. Are you looking for painted or chrome?
Thanks!

.

I apologize , I forgot I asked here, we bought a parts truck that had trim. thanks for response.

straight-shot · Post by **straight-shot** » Thu Aug 14, 2014 11:14 pm

PM's sent!
Thanks!

Johnstonejw · Post by **Johnstonejw** » Tue Aug 19, 2014 3:49 pm

Do you still have any inner fenders? I need the passenger side for a 72 250 camper special.

jreb333 · Post by **jreb333** » Thu Aug 21, 2014 12:47 pm

i need a good automatic shift steering column without a lot of endplay and working switches and good wiring. steering wheel not needed.

The FORDification.com Forums

Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.