Parting 3 bumps! Let me know what you might need.

kendog76 · Post by **kendog76** » Wed Oct 22, 2014 10:43 pm

Do you have and of the west coast junior mirrors or camper special mirrors? I need a left and a right. Do you also have the armrest piece that surrounds the door latch assembly for a 1968?

colnago · Post by **colnago** » Sun Nov 02, 2014 12:46 am

Looking for a 3.50 rear diff for a '67 F250. Have anything?

Thanks,

Joseph

kevins72 · Post by **kevins72** » Thu Nov 06, 2014 1:54 pm

hello, im looking for a good therostat housing for a 360 on my 1972 ranger, I need it to have a good lip around the edge so the hose won't slip off, like mine does. thanks kevin

CharlaineC · Post by **CharlaineC** » Sat Nov 08, 2014 2:26 am

Looking for the following

Washer res
Door light switches with brackets
side marker lights
window channels and silencers

themoldfords · Post by **themoldfords** » Mon Nov 17, 2014 1:55 pm

Any chance you have a 240 or 300 exhaust manifold, doesn't have to be a good one.

Thanks

KulpFarm · Post by **KulpFarm** » Sun Feb 01, 2015 12:51 pm

Looking for patch panel on 67 f100 hood on drivers side near emblem.
Have anything? Cost to ship to 19438?

straight-shot · Post by **straight-shot** » Sun Feb 01, 2015 10:42 pm

Hi guys!
Sorry I've lost track of this post lately.
I do not have any of the previous requested parts, except for the hood patch panel for kulp farm. I have a couple hoods that I could cannibalize.How big of a piece do you need?
I took one to the crusher but still have lots of parts left.
Thanks!
Todd

KulpFarm · Post by **KulpFarm** » Mon Feb 02, 2015 3:33 pm

Drivers side 24-25" long by 3-4" height bottom portion.
Part that make contact with fender

Any back lower cab portions? Right or left

moonlighter · Post by **moonlighter** » Tue Feb 03, 2015 12:57 pm

Sent PM looking for steering column etc from 70 2wd

ponyexpress · Post by **ponyexpress** » Thu Feb 05, 2015 9:05 pm

HI Straight-Shot,

Any chance you might have rear window stainless trim for a ranger? Thanks !

urchinhead · Post by **urchinhead** » Sun Feb 08, 2015 1:28 pm

I am also looking for a good steering wheel and a column for a 1970 f100, floor shift, power steering. I also need the stock air cleaner assembly for a 360 and uncut metal door panels without holes for panel/trim clips.

dsnyder78 · Post by **dsnyder78** » Wed Mar 18, 2015 12:07 am

Happen to have 351M/400 of 302 engine perches? That's what Im looking for.

Thanks

Bohman731 · Post by **Bohman731** » Mon Mar 23, 2015 11:51 pm

Hey! Do you have both front brake rotors that would fit a 71 2WD F250 that are in decent shape?

Darren · Post by **Darren** » Wed Apr 01, 2015 12:02 pm

I'm looking for a set of headliner trim and the rear window garnish moulding for a '67. doclee462 (at) yahoo (dot) com

Thanks

76Kroh · Post by **76Kroh** » Wed Apr 15, 2015 12:21 am

Do you have a spare tire mount that mounts under the bed?

The FORDification.com Forums

Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.