1969 f100 Restomod

gasnoil · Post by **gasnoil** » Sun Apr 26, 2015 8:57 pm

hfdco4 wrote:Wow, Amazing work!!!!!

Thanks hfdco4

gasnoil · Post by **gasnoil** » Sun Apr 26, 2015 9:09 pm

More fill n sand. The front hood had a collision, everywhere there was a reinforcement caused a resulting wave in the metal. Hammer and dolly sheet metal,cold shrink, Skim coat, block sand,skim coat,block sand - repeat ,repeat,repeat until you get it right.

gasnoil · Post by **gasnoil** » Sun Apr 26, 2015 9:12 pm

Skim coat on top of box. It was in decent shape, I think the previous owner had a metal railing. But this is an area that is at eye level, very important to get it 100% straight, so a skim coat is the way to go.

hfdco4 · Post by **hfdco4** » Tue Apr 28, 2015 6:36 am

Fantastic work, truck is coming along.

gasnoil · Post by **gasnoil** » Sat May 02, 2015 9:02 pm

Epoxy primer-PPG DELFLEET 2.1 EPOXY

Pro Form Direct to metal urethane high build primer(black)

gasnoil · Post by **gasnoil** » Fri Jun 05, 2015 9:54 pm

Update:after 4 weeks of travelling, started working on the truck again.only 4 weeks left to the Atlantic Nationals .

Lowered rear suspension....not as much as i was hoping but did manage to get a full inch.

Started the install of the rear roll pan and exhaust .

gasnoil · Post by **gasnoil** » Fri Jun 05, 2015 9:59 pm

Also adding another snorkel.

gasnoil · Post by **gasnoil** » Sun Jul 05, 2015 9:26 pm

Update

20150609_202945_resized.jpg

20150609_215230_resized.jpg

20150621_135531_resized.jpg

Worked on upholstering seat and refinished Dodge Ram wheels that will go on it...

jimmy828 · Post by **jimmy828** » Sun Jul 05, 2015 9:40 pm

It all looks good but can't wait to see finished roll pan.

gasnoil · Post by **gasnoil** » Sun Jul 05, 2015 9:42 pm

20150622_174929_resized_2.jpg

Dieppe-20150606-00117.jpg

Worked on upholstery and refinished the Dodge Ram wheels that will go on truck. Painted interior dash "gun metal grey" same as wheels.

Finished roll pan and sprayed quick test paint on tailgate and roll pan (base coat /clearcoat with matting agent)

gasnoil · Post by **gasnoil** » Sun Jul 05, 2015 10:04 pm

Finished roll pan.

Utilized a scrap Dodge Ram (2009 up) rear steel bumper. Welded the exhaust cutouts on roll pan. Utilized the ram tailpipes as well.

sittinlow88 · Post by **sittinlow88** » Tue Jul 07, 2015 12:31 pm

Nice clean metal work! Looks like you will make the deadline!

48prerunner · Post by **48prerunner** » Thu Jul 09, 2015 5:50 am

NICE! I really like the ram tail pipes, I thought of doing that with the rear bumper never thought about the pan, very creative. I gave up when I ran out of room in the rear with bags and sway bar and rear tank + 3" exhaust not enough real estate on my truck.

gasnoil · Post by **gasnoil** » Fri Jul 10, 2015 6:00 am

sittinlow88 wrote:Nice clean metal work! Looks like you will make the deadline!

Thank you! Made the deadline ,car show starts today

gasnoil · Post by **gasnoil** » Fri Jul 10, 2015 6:00 am

48prerunner wrote:NICE! I really like the ram tail pipes, I thought of doing that with the rear bumper never thought about the pan, very creative. I gave up when I ran out of room in the rear with bags and sway bar and rear tank + 3" exhaust not enough real estate on my truck.

Thanks!

The FORDification.com Forums

1969 f100 Restomod

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style

Re: 1969 F100 Resto Mod - Parts truck style