Parting 68 F100 240/300 3 spd column shift long bed

MadDragon · Post by **MadDragon** » Wed Oct 28, 2015 5:35 pm

Need coil spring lower seat and the shim that sometimes sits underneath. Also need an axle pivot bolt/nut.

NotMonkey · Post by **NotMonkey** » Wed Oct 28, 2015 9:10 pm

Would you be willing to cut the radio opening from the dash? Mine was destroyed by previous owner!

Thanks,
Scott

Abrams · Post by **Abrams** » Thu Oct 29, 2015 1:48 am

How are the inner fenders and radiator support? Id be interested if there rust free.
A

themoldfords · Post by **themoldfords** » Thu Oct 29, 2015 8:58 am

Scott,

I do not have a problem cutting the radio opening from the cab, as the rest of the cab is garbage. $25 plus shipping

Abrams,

Core support and inner fenders are scrap. Lots of rust holes.

themoldfords · Post by **themoldfords** » Wed Nov 18, 2015 3:38 pm

I bought some used West Coast Mirrors and put them on the truck, see below, but I cannot get into the garage/shop with them on, so I will be parting ways with them. They come with all Mounting hardware, minus 2 bolts/nutcerts for mounting the brackets to the doors. You can see the mirrors on the truck, I do not have any close ups at this time. Shoot me an offer.

Gunnerboy · Post by **Gunnerboy** » Wed Nov 18, 2015 10:22 pm

what engine parts would you have left over sir? And where does your oil dipstick attach to this Engine.. Im in need of a dipstick and tube, And a steering wheel. Im located in the Longview WA area. Thanks

themoldfords · Post by **themoldfords** » Wed Nov 18, 2015 10:46 pm

I haven't really sold any engine parts. I have a good exhaust manifold, intake, carter yf carb air cleaner assy, starter, alternator, dipstick, valve cover, clutch (unsure of the condition), flywheel (unsure of the condition) and probably a lot more stuff that I am forgetting. I will try to get a picture of the dipstick for you.

Gunnerboy · Post by **Gunnerboy** » Wed Nov 18, 2015 10:50 pm

Awesome you probably just made my week!! On my engine there is a plate that attaches via 4 bolt on the block that the oil dipstick goes into.. Im really hoping to find one of those plates and the dipstick and tube. Also is the carburator a one barrel or 2?

Gunnerboy · Post by **Gunnerboy** » Sun Nov 22, 2015 9:50 am

Any luck on parts sir?

themoldfords · Post by **themoldfords** » Sun Nov 22, 2015 11:23 pm

Sorry, it has been a busy weekend. It does not look like I have the appropriate dipstick. The carb is a single barrel that probably needs a rebuild.

Dipstick

Carter YF Carb

Gunnerboy · Post by **Gunnerboy** » Sun Nov 22, 2015 11:49 pm

well shoot.. Thanks for the pictures sir!

IN2FORD · Post by **IN2FORD** » Tue Nov 24, 2015 2:38 pm

Did this have a power steering column? If so I would be interested in the clamp that holds the column to the bracket at the firewall located near the brake booster. Almost looks like a hose clamp.

Barry

themoldfords · Post by **themoldfords** » Tue Nov 24, 2015 3:09 pm

Manual steering

themoldfords · Post by **themoldfords** » Wed Feb 10, 2016 1:42 pm

Still have lots of parts for this thing. Inline 6 parts, engine harness for a 6 and rear harness, mirrors, 3 speed column shift trans... lots more.

Let me know what you need!

Aurelio Landeros · Post by **Aurelio Landeros** » Wed Feb 10, 2016 8:52 pm

themoldfords wrote:Still have lots of parts for this thing. Inline 6 parts, engine harness for a 6 and rear harness, mirrors, 3 speed column shift trans... lots more.

Let me know what you need!

im looking for accelerator cables, and taillights harness and the gauge cluster and possibly the mirrors, quote?

The FORDification.com Forums

Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed

Re: Parting 68 F100 240/300 3 spd column shift long bed