4 speed interchange
Moderators: FORDification, 70_F100
-
M-100
- New Member
- Posts: 168
- Joined: Fri Nov 28, 2008 7:35 pm
4 speed interchange
Will a 4 speed that was on an fe work on a small block by simply changing the bell house ? And will the 3 speed bell work on the 4 speed?
-
eggman918
- Blue Oval Guru
- Posts: 1098
- Joined: Fri Nov 20, 2009 12:56 pm
- Location: Paulden,AZ.
Re: 4 speed interchange
IIRC threr is a difference in input shaft length between the small block and the big block trans's
Steve
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner
"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
-
Canonman67
- Blue Oval Fan
- Posts: 536
- Joined: Wed Apr 30, 2014 4:49 pm
- Location: California, Galt
Re: 4 speed interchange
I believe it will work if the depth of the bell housing is the same. Make sure you check that the pilot bearing is the correct size.