67-72 parts Alberta

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

Post Reply
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

67-72 parts Alberta

Post by mk »

Cleaning out the garage and hoping to find homes for a bunch of parts...


-3 spd standard p/s column
-radio/spkr/bezel/brackets 68-72 setup
-assorted nameplates, side chrome
-'70 grill insert
-exhaust manifold heat duct 360/390
-various harnesses and bits thereof including '79 F150 dash harness and 69 Cougar/Mustang dash harness
-mirrors
-p/s a/t columns

...and more :D

mike
Last edited by mk on Sat Sep 24, 2016 2:49 pm, edited 1 time in total.
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

67-72 parts Alberta

Post by mk »

Still have most of these parts available, now supplemented by a '66 Mercury M250 as well :)


mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: 67-72 parts Alberta

Post by colnago »

Mike,

Don't part the '66! I know; cash talks, but I would hate to see it parted.

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

67-72 parts Alberta

Post by mk »

Don't worry, that Merc goes in one piece. They don't seem to bring as much up here as they might south of the line. This one has the long flareside box on it but by some strange quirk also has the padded dash :hmm:


mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
ironhorse2022
New Member
New Member
Posts: 49
Joined: Mon Dec 28, 2015 3:20 pm

Re: 67-72 parts Alberta

Post by ironhorse2022 »

Hi. What do you want for the radio setup?

Thanks
John
1972 F100 custom. 360/c6/PS/long bed Idaho truck with 75k
User avatar
chazskinz
New Member
New Member
Posts: 49
Joined: Fri Jan 09, 2015 2:23 pm
Location: MD

Re: 67-72 parts Alberta

Post by chazskinz »

looking for a parking lamp bucket for my 67 f100 stepside
if you have it or can get to it how much?
thanks for responding! for the passenger side.
:yt:
Edhouse
New Member
New Member
Posts: 3
Joined: Tue Jan 10, 2017 8:48 pm

Re: 67-72 parts Alberta

Post by Edhouse »

By any chance do you still have the radio setup? More specifically I'm in search of whatever holds the speaker in place, but I would take it all if you still had it. I'm just across the way in BC.
1969 F250, 360 cid, 4 speed. "Big Red Stump Puller"
1965 Volkswagen 11-Window Microbus. 1600cc.
2014 Jeep JK Unlimited.
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

67-72 parts Alberta

Post by mk »

I think I've still got the stuff; may even have a spare speaker bracket...
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
meteor545
New Member
New Member
Posts: 65
Joined: Tue Aug 13, 2013 7:55 pm

Re: 67-72 parts Alberta

Post by meteor545 »

have you got a half decent rubber floor mat or black carpet for a c6 hump regular cab/
67 f100 429 c6
65 meteor rideau
05 crown vic
13 edge
09 H-D sportster 1200c
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: 67-72 parts Alberta

Post by mk »

Sorry, no carpets/mats left. But I do have a set of NOS Ford superduty king ranch tan floor mats :D

Ed, I do have an extra speaker bracket.

mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: 67-72 parts Alberta

Post by colnago »

I don't suppose you have a switch for a cargo light, do you? The circular one with the chrome ring?

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: 67-72 parts Alberta

Post by mk »

Believe I do, let me check...
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
Edhouse
New Member
New Member
Posts: 3
Joined: Tue Jan 10, 2017 8:48 pm

Re: 67-72 parts Alberta

Post by Edhouse »

mk wrote:Sorry, no carpets/mats left. But I do have a set of NOS Ford superduty king ranch tan floor mats :D

Ed, I do have an extra speaker bracket.

mike
Thanks Mike. I'll take it if the price is right.
1969 F250, 360 cid, 4 speed. "Big Red Stump Puller"
1965 Volkswagen 11-Window Microbus. 1600cc.
2014 Jeep JK Unlimited.
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

67-72 parts Alberta

Post by mk »

send me an email or note through the system here, Ed.
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
DisneysPatB
Preferred User
Preferred User
Posts: 279
Joined: Wed Feb 08, 2017 7:58 pm
Location: Sunland, CA

Re: 67-72 parts Alberta

Post by DisneysPatB »

What do you still have left?
1970 F250 460 C6 - Project - Currently not running.
1999 Dodge Durango SLT 4 x 4 5.9 Magnum -not running.
1999 Toyota Corolla - Daily Driver.

https://fordification.com/forum/app.php ... y/album/43
Post Reply