cdnwillyg wrote:So what is the plan on the cab? Looks pretty good from here!
Cab looks really good. trade ya Awesome your making headway!!
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
cdnwillyg wrote:So what is the plan on the cab? Looks pretty good from here!
I have a small spot on the floor to replace and have sourced a section from another truck. There is a dent just behind the passenger door I have to fix and I would like to seal up the gas filler hole in the Drivers side.
Once I get the floor sealed up I want to clean the bottom and paint it with POR15 that I have. The cab came from CA and someone left a rag on the floor which got wet and caused the root. The cab mounts are actually good.
Not too much at all Paul, at least compared to Manny's project! I used por 15 on a couple vehicles and I think its awesome stuff for rusted areas as long as they are cleaned. Good luck! keep us posted!
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
hfdco4 wrote: The cab came from CA and someone left a rag on the floor which got wet and caused the root. The cab mounts are actually good.
Really............ I don't like you No happy you have a good one to deal with!!!
Here is one of the brake spiders i got cleaned up. Let me know i will clean the other one up if you need them.
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
So that is what I have to work with. This cab has journeyed far and wide. Was a Cali Truck, then I saw it in the town I lived in Massachusetts south of Boston. I finally ended up traveling to North of Boston to actually buy this thing. I removed the Cab and Bed and scrapped the frame. Then trucked it to Maryland where I bought another two wheel drive for parts that has a better bed.
I am extremely lucky to have stumbled onto a cab in very good shape.
You do not have the required permissions to view the files attached to this post.
The funny thing is this truck sat for a couple of years 10 miles from my house in Mass. Tried on several occasions to buy it, finally bought it when it was almost 60 miles from my house in Mass.
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070