Hunting for a solid Hood and Passenger side inner fender, battery tray too if you've got it. Located near Macon, Georgia. Closer is better, but can drive a bit.
Need to pull hood and fender for other task. They are already so far gone that I'm not sure there would even be enough left to install. Would like to have better components on hand before removal starts. Also really getting tired if rust bits raining on my head every time I'm under the hood.
Hood & Passenger inner fender
Moderator: FORDification
-
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Hood & Passenger inner fender
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
-
- New Member
- Posts: 234
- Joined: Fri Aug 19, 2016 4:45 pm
Re: Hood & Passenger inner fender
i have both,but way out in ca,
-
- New Member
- Posts: 234
- Joined: Fri Aug 19, 2016 4:45 pm
Re: Hood & Passenger inner fender
i have both,but way out in ca,
-
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Re: Hood & Passenger inner fender
Thanks, but I definitely can't go that far for it. Until the F-100 is registered, I'd have to borrow a truck to come get parts. It would be better if the parts were in state, don't really feel comfortable heading out of state in a borrowed truck. If its in an adjoining state I'll see what I can do, otherwise it'll have to wait until the F-100 is back on the road.
I have got a quote requested through car-part.com for the closest salvage yard claiming to have the parts, but not expecting much to come of it. Sent a request to same place a couple of weeks ago about a seat and sliding rear window they had listed, but they never replied then.
I have got a quote requested through car-part.com for the closest salvage yard claiming to have the parts, but not expecting much to come of it. Sent a request to same place a couple of weeks ago about a seat and sliding rear window they had listed, but they never replied then.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
-
- New Member
- Posts: 234
- Joined: Fri Aug 19, 2016 4:45 pm
Re: Hood & Passenger inner fender
i understand,way too $ to ship,hope you find the parts you need local.