What do I do with this
Moderator: FORDification
-
Jsimon
- New Member
- Posts: 47
- Joined: Sat Sep 21, 2019 2:15 pm
- Location: Akron, Ohio
What do I do with this
Here is a picture of the bottom of my cab. The eye bolt is in my cab mount
I've done the floors, rockers, a pillars, firewall, etc so I dont want to give up now, but when I started the rear cab corners I realized how bad the middle between the cab mounts is. (Its worse than the picture shows) Anyone got any tips for tackling this? Not much to weld to, might be using por-15 and body panel epoxy. Not looking for pretty, just solid.
You do not have the required permissions to view the files attached to this post.
1972 f250 4x4 390 4speed
-
cep62
- 100% FORDified!
- Posts: 2062
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: What do I do with this
Well LMC has a cross member for $150.
Or you can get some light cardboard or heavy paper ,and cut and paste up a template.
Take it to a fab shop and see what they'll charge you for some metal.
if you're handy you can cut your own pieces and save some money.
Or you can get some light cardboard or heavy paper ,and cut and paste up a template.
Take it to a fab shop and see what they'll charge you for some metal.
if you're handy you can cut your own pieces and save some money.
-
Jsimon
- New Member
- Posts: 47
- Joined: Sat Sep 21, 2019 2:15 pm
- Location: Akron, Ohio
Re: What do I do with this
It's not the crossmember, here's a better picture
It's the very back of the cab under the fuel tank shelf.
You do not have the required permissions to view the files attached to this post.
1972 f250 4x4 390 4speed
-
jzjames
- 100% FORDified!
- Posts: 1779
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: What do I do with this
No easy way out. You just gotta fab and weld a new piece.
-
cep62
- 100% FORDified!
- Posts: 2062
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: What do I do with this
Your floor repair looks nice ,
working in that position shouldn't be that bad.
measure carefully before you start cutting.
working in that position shouldn't be that bad.
measure carefully before you start cutting.
-
Jsimon
- New Member
- Posts: 47
- Joined: Sat Sep 21, 2019 2:15 pm
- Location: Akron, Ohio
Re: What do I do with this
Cut out the bad last night, much less intimidating than I thought it would be, here's what it looks like underneath
There were two rusted out layers, the bottom of the cab and then a u channel frame below that which held the cab mount spacer. I'll patch the floor then recreate the u channel and cover it with another sheet. No one will ever see it. 
You do not have the required permissions to view the files attached to this post.
1972 f250 4x4 390 4speed
-
jzjames
- 100% FORDified!
- Posts: 1779
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: What do I do with this
Good job. You saved the threaded holes for the seatbelts/seat runners (?)
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: What do I do with this
Great work and thanks for showing us! 
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
Jsimon
- New Member
- Posts: 47
- Joined: Sat Sep 21, 2019 2:15 pm
- Location: Akron, Ohio
Re: What do I do with this
Finished the outer panel with 16ga metal, reused the original spacer for the cab mount and everything lined up great. Only thing left is to put the seatbelt nuts back on.
You do not have the required permissions to view the files attached to this post.
1972 f250 4x4 390 4speed
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: What do I do with this
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
cstoyer
- New Member
- Posts: 201
- Joined: Wed Jul 08, 2015 9:32 am
- Location: NW PA
Re: What do I do with this
Sometimes you just dive in and figure it out as you go. but obviously you have skill by your previous repair work.
68 F250 4x4